Prediction of Subsurface Microcrack Damage Depth Based on Surface Roughness in Diamond Wire Sawing of Monocrystalline Silicon
Materials · 24.01.2024 · 17 (3) · 553
DOI: 10.3390/ma17030553 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.01.2024. Verfasst von Keying Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Project, Natural Science Foundation of Shandong Province, Opening Foundation of Key Lab.of Manufacturing Equipment of Shaanxi Province.
Abstract (Originalsprache)
In diamond wire saw cutting monocrystalline silicon (mono-Si), the material brittleness removal can cause microcrack damage in the subsurface of the as-sawn silicon wafer, which has a significant impact on the mechanical properties and subsequent processing steps of the wafers. In order to quickly and non-destructively obtain the subsurface microcrack damage depth (SSD) of as-sawn silicon wafers, this paper conducted research on the SSD prediction model for diamond wire saw cutting of mono-Si, and established the relationship between the SSD and the as-sawn surface roughness value (SR) by comprehensively considering the effect of tangential force and the influence of the elastic stress field and residual stress field below the abrasive on the propagation of median cracks. Furthermore, the theoretical relationship model between SR and SSD has been improved by adding a coefficient considering the influence of material ductile regime removal on SR values based on experiments sawing mono-Si along the (111) crystal plane, making the theoretical prediction value of SSD more accurate. The research results indicate that a decrease in wire speed and an increase in feed speed result in an increase in SR and SSD in silicon wafers. There is a non-linear increasing relationship between silicon wafer SSD and SR, with SSD = 21.179 Ra4/3. The larger the SR, the deeper the SSD, and the smaller the relative error of SSD between the theoretical predicted and experimental measurements. The research results provide a theoretical and experimental basis for predicting silicon wafer SSD in diamond wire sawing and optimizing the process.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, China.
- Key Laboratory of Manufacturing Equipment of Shaanxi Province, Xi'an 710048, China.
Förderung
- National Key Research and Development Project
- Natural Science Foundation of Shandong Province
- Opening Foundation of Key Lab.of Manufacturing Equipment of Shaanxi Province
- Opening Foundation of Key Lab of Manufacturing Equipment of Shaanxi Province
Zitieren
APA
Wang, K., Gao, Y., & Yang, C. (2024). Prediction of Subsurface Microcrack Damage Depth Based on Surface Roughness in Diamond Wire Sawing of Monocrystalline Silicon. Materials, 17(3), 553. https://doi.org/10.3390/ma17030553
Vancouver
Wang K, Gao Y, Yang C. Prediction of Subsurface Microcrack Damage Depth Based on Surface Roughness in Diamond Wire Sawing of Monocrystalline Silicon. Materials. 2024;17(3):553. doi:10.3390/ma17030553
BibTeX
@article{Wang2024,
author = {Wang, Keying and Gao, Yufei and Yang, Chunfeng},
title = {Prediction of Subsurface Microcrack Damage Depth Based on Surface Roughness in Diamond Wire Sawing of Monocrystalline Silicon},
journal = {Materials},
year = {2024},
volume = {17},
number = {3},
pages = {553},
doi = {10.3390/ma17030553}
}
EUVIMED