EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance

Peter Jurči iD, Ivo Dlouhý iD

Materials · 23.01.2024 · 17 (3) · 548

DOI: 10.3390/ma17030548 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 23.01.2024. Verfasst von Peter Jurči und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials, Faculty of Material Sciences and Technology, Slovak University of Technology, Paulinska 16, 917 24 Trnava, Slovakia. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 352 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund, ESIF and the EU Operational Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional heat treatment is not capable of converting a sufficient amount of retained austenite into martensite in high-carbon or high-carbon and high-alloyed iron alloys. Cryogenic treatment induces the following alterations in the microstructures: (i) a considerable reduction in the retained austenite amount, (ii) formation of refined martensite coupled with an increased number of lattice defects, such as dislocations and twins, (iii) changes in the precipitation kinetics of nano-sized transient carbides during tempering, and (iv) an increase in the number of small globular carbides. These microstructural alterations are reflected in mechanical property improvements and better dimensional stability. A common consequence of cryogenic treatment is a significant increase in the wear resistance of steels. The current review deals with all of the mentioned microstructural changes as well as the variations in strength, toughness, wear performance, and corrosion resistance for a variety of iron alloys, such as carburising steels, hot work tool steels, bearing and eutectoid steels, and high-carbon and high-alloyed ledeburitic cold work tool steels.

Schlagwörter

Stichwörter der Autor:innen

carbidescorrosion performancecryogenic treatmentmartensitemechanical propertiesmicrostructureretained austenitesteelswear performance

Autor:innen und Institutionen

  • Department of Materials, Faculty of Material Sciences and Technology, Slovak University of Technology, Paulinska 16, 917 24 Trnava, Slovakia.
  • Institute of Physics of Materials, Czech Academy of Sciences, Zizkova 22, 61662 Brno, Czech Republic.
  • Institute of Materials Science and Engineering, NETME Centre, Brno University of Technology, Technicka 2, 61669 Brno, Czech Republic.

ORCID-Profile: Peter Jurči, Ivo Dlouhý

Förderung

  • European Regional Development Fund
  • ESIF and the EU Operational Programme

Zitieren

APA

Jurči, P., & Dlouhý, I. (2024). Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance. Materials, 17(3), 548. https://doi.org/10.3390/ma17030548

Vancouver

Jurči P, Dlouhý I. Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance. Materials. 2024;17(3):548. doi:10.3390/ma17030548

BibTeX
@article{Juri2024,
  author = {Jurči, Peter and Dlouhý, Ivo},
  title = {Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {3},
  pages = {548},
  doi = {10.3390/ma17030548}
}
Kostenlos starten →