Elastomer-Based Sealing O-Rings and Their Compatibility with Methanol, Ethanol, and Hydrotreated Vegetable Oil for Fueling Internal Combustion Engines
Materials · 15.01.2024 · 17 (2) · 430
DOI: 10.3390/ma17020430 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.01.2024. Verfasst von Miroslav Müller und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering, Czech University of Life Sciences Prague, Kamycka 129, Suchdol, 165 00 Prague, Czech Republic. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work was supported by the project "Development of primary alcohol fueled engine prototype - No. LTAIN19029 and INTER-EXCELLENCE programme, INTER-ACTION su…, This work was supported by the project "Development of primary alcohol fueled engine prototype - No. LTAIN19029 ,Ministry of Education, Youth and Sport of the…, Ministry of Education, Youth, and Sport of the Czech Republic.
Abstract (Originalsprache)
Green methanol, ethanol, and diesel-based hydrotreated vegetable oils are some of the renewable liquid fuels that show satisfactory performance in diesel engines. A notable advantage of these fuels is that they are renewable and do not require significant modifications in the existing engines for successful operation. Suitable fuel systems, especially their material compatibility, remain unresolved, and therefore, it is a weak link in their large-scale adaptation. Elastomer-based sealing O-rings lose their mechanical properties after a short exposure time to these fuels, adversely impacting their functionality. This research study evaluated the long-term material compatibility of different elastomer-based sealing materials by immersing the O-rings in these test fuels (hydrotreated vegetable oil, methanol, ethanol, and diesel) for different time intervals (i.e., up to 15 months). The material compatibility was assessed mainly by investigating these changes in various mechanical properties of these O-rings, namely tensile strength (ΔTs), elongation at break (ΔEb), Shore A hardness (ΔH), and mass (ΔM). The degradation of mechanical properties was studied and analyzed during the immersion interval from 0.9 to 15.2 months and compared with O-rings kept in a normal atmosphere. It was noted that individual fuels affect various mechanical properties significantly. In a short interval of 0.9 months (28 days), significant changes in the mechanical properties of the sealing O-rings were observed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Engineering, Czech University of Life Sciences Prague, Kamycka 129, Suchdol, 165 00 Prague, Czech Republic.
ORCID-Profile: Miroslav Müller, Rajesh Kumar Mishra, Martin Pexa
Förderung
- This work was supported by the project "Development of primary alcohol fueled engine prototype - No. LTAIN19029 and INTER-EXCELLENCE programme, INTER-ACTION su…
- This work was supported by the project "Development of primary alcohol fueled engine prototype - No. LTAIN19029 ,Ministry of Education, Youth and Sport of the…
- Ministry of Education, Youth, and Sport of the Czech Republic
- INTER-EXCELLENCE programme, INTER-ACTION sub-programme, India
Zitieren
APA
Müller, M., Mishra, R. K., Šleger, V., Pexa, M., & Čedík, J. (2024). Elastomer-Based Sealing O-Rings and Their Compatibility with Methanol, Ethanol, and Hydrotreated Vegetable Oil for Fueling Internal Combustion Engines. Materials, 17(2), 430. https://doi.org/10.3390/ma17020430
Vancouver
Müller M, Mishra RK, Šleger V, Pexa M, Čedík J. Elastomer-Based Sealing O-Rings and Their Compatibility with Methanol, Ethanol, and Hydrotreated Vegetable Oil for Fueling Internal Combustion Engines. Materials. 2024;17(2):430. doi:10.3390/ma17020430
BibTeX
@article{Mller2024,
author = {Müller, Miroslav and Mishra, Rajesh Kumar and Šleger, Vladimir and Pexa, Martin and Čedík, Jakub},
title = {Elastomer-Based Sealing O-Rings and Their Compatibility with Methanol, Ethanol, and Hydrotreated Vegetable Oil for Fueling Internal Combustion Engines},
journal = {Materials},
year = {2024},
volume = {17},
number = {2},
pages = {430},
doi = {10.3390/ma17020430}
}
EUVIMED