EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic Splitting Performance and Energy Dissipation of Fiber-Reinforced Concrete under Impact Loading

Dashun Cui, Limin Wang, Chunwei Zhang iD, Huiting Xue, Dianwei Gao iD, Fanxiu Chen iD

Materials · 14.01.2024 · 17 (2) · 421

DOI: 10.3390/ma17020421 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.01.2024. Verfasst von Dashun Cui und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Qingdao University of Technology, Qingdao 266033, China. Die Arbeit wurde bisher 67-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, National Key Research and Development Program, Key Research and Development Program of Shandong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the influence of different fiber materials on the dynamic splitting mechanical properties of concrete was investigated. Brazil disc dynamic splitting tests were conducted on plain concrete, palm fiber-reinforced concrete, and steel fiber-reinforced concrete specimens using a split Hopkinson pressure bar (SHPB) test device with a 100 mm diameter and a V2512 high-speed digital camera. The Digital Image Correlation (DIC) technique was used to analyze the fracture process and crack propagation behavior of different fiber-reinforced concrete specimens and obtain their dynamic tensile properties and energy dissipation. The experimental results indicate that the addition of fibers can enhance the impact toughness of concrete, reduce the occurrence of failure at the loading end of specimens due to stress concentration, delay the time to failure of specimens, and effectively suppress the expansion of cracks. Steel fibers exhibit a better crack-inhibiting effect on concrete compared to palm fibers. The incident energy for the three types of concrete specimens is roughly the same under the same impact pressure. Compared with plain concrete, the energy absorption rate of palm fiber concrete is decreased, while that of steel fiber concrete is increased. Palm fiber-reinforced concrete and steel fiber-reinforced concrete have lower peak strains than plain concrete under the same loading duration. The addition of steel fibers significantly impedes the internal cracking process of concrete specimens, resulting in a relatively slow growth of damage variables.

Schlagwörter

Stichwörter der Autor:innen

dynamic splitting testenergy dissipationfiber-reinforced concretesplit Hopkinson pressure bar (SHPB) device

Autor:innen und Institutionen

  • School of Civil Engineering, Qingdao University of Technology, Qingdao 266033, China.
  • School of Science, Qingdao University of Technology, Qingdao 266033, China.
  • China Construction Second Engineering Bureau LTD. East China Company, Shanghai 200120, China.
  • School of Architecture and Civil Engineering, Shenyang University of Technology, Shenyang 110870, China.

ORCID-Profile: Chunwei Zhang, Dianwei Gao, Fanxiu Chen

Förderung

  • Natural Science Foundation of Shandong Province
  • National Key Research and Development Program
  • Key Research and Development Program of Shandong Province

Zitieren

APA

Cui, D., Wang, L., Zhang, C., Xue, H., Gao, D., & Chen, F. (2024). Dynamic Splitting Performance and Energy Dissipation of Fiber-Reinforced Concrete under Impact Loading. Materials, 17(2), 421. https://doi.org/10.3390/ma17020421

Vancouver

Cui D, Wang L, Zhang C, Xue H, Gao D, Chen F. Dynamic Splitting Performance and Energy Dissipation of Fiber-Reinforced Concrete under Impact Loading. Materials. 2024;17(2):421. doi:10.3390/ma17020421

BibTeX
@article{Cui2024,
  author = {Cui, Dashun and Wang, Limin and Zhang, Chunwei and Xue, Huiting and Gao, Dianwei and Chen, Fanxiu},
  title = {Dynamic Splitting Performance and Energy Dissipation of Fiber-Reinforced Concrete under Impact Loading},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {2},
  pages = {421},
  doi = {10.3390/ma17020421}
}
Kostenlos starten →