Effect of Residual Stress and Microstructure on the Fatigue Crack Growth Behavior of Aluminum Friction Stir Welded Joints
Materials · 12.01.2024 · 17 (2) · 385
DOI: 10.3390/ma17020385 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.01.2024. Verfasst von Yanning Guo und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Education Department of Shaanxi Province, Post-doctoral Research Project in Shaanxi Province.
Abstract (Originalsprache)
Friction stir welding (FSW) has been adopted in the aerospace industry for fabricating structural alloys due to the low melting point and high thermal conductivity of aviation aluminum alloys. However, welding residual stresses can lead to secondary deformation in friction stir welded (FSWed) structures. Additionally, microstructural characteristics impact the crack growth rates and directions in these structures. Therefore, it is necessary to investigate the effects of residual stress and microstructure on the fatigue responses of FSWed joints. In this paper, we studied the fatigue crack growth behavior of two homogeneous and dissimilar FSWed joints with varying welding parameters, namely 2024-T3 and 7075-T6. The residual stresses were measured with the X-ray diffraction method. The dislocations and precipitates in different zones of the FSWed joints were analyzed via transmission electron microscopy (TEM). The results demonstrated that the residual stress significantly affected the fatigue crack growth rate and direction; the tensile residual stress promoted fatigue crack growth and offset the decrease in the fatigue crack growth rate that occurred due to grain refinement. The results of the microstructural analysis indicated that dislocation density and sliding resistance increased with the decrease in rotational speed and led to a decreased rate of fatigue crack propagation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
- School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China.
ORCID-Profile: Yanning Guo
Förderung
- Education Department of Shaanxi Province
- Post-doctoral Research Project in Shaanxi Province
Zitieren
APA
Guo, Y., & Li, P. (2024). Effect of Residual Stress and Microstructure on the Fatigue Crack Growth Behavior of Aluminum Friction Stir Welded Joints. Materials, 17(2), 385. https://doi.org/10.3390/ma17020385
Vancouver
Guo Y, Li P. Effect of Residual Stress and Microstructure on the Fatigue Crack Growth Behavior of Aluminum Friction Stir Welded Joints. Materials. 2024;17(2):385. doi:10.3390/ma17020385
BibTeX
@article{Guo2024,
author = {Guo, Yanning and Li, Peiyao},
title = {Effect of Residual Stress and Microstructure on the Fatigue Crack Growth Behavior of Aluminum Friction Stir Welded Joints},
journal = {Materials},
year = {2024},
volume = {17},
number = {2},
pages = {385},
doi = {10.3390/ma17020385}
}
EUVIMED