Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling
Materials · 08.01.2024 · 17 (2) · 317
DOI: 10.3390/ma17020317 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.01.2024. Verfasst von Víctor Tuninetti und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Universidad de La Frontera, Temuco 4811230, Chile. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DIUFRO, Universidad de La Frontera.
Abstract (Originalsprache)
The manufacturing processes and design of metal and alloy products can be performed over a wide range of strain rates and temperatures. To design and optimize these processes using computational mechanics tools, the selection and calibration of the constitutive models is critical. In the case of hazardous and explosive impact loads, it is not always possible to test material properties. For this purpose, this paper assesses the efficiency and the accuracy of different architectures of ANNs for the identification of the Johnson–Cook material model parameters. The implemented computational tool of an ANN-based parameter identification strategy provides adequate results in a range of strain rates required for general manufacturing and product design applications. Four ANN architectures are studied to find the most suitable configuration for a reduced amount of experimental data, particularly for cases where high-impact testing is constrained. The different ANN structures are evaluated based on the model’s predictive capability, revealing that the perceptron-based network of 66 inputs and one hidden layer of 30 neurons provides the highest prediction accuracy of the effective flow stress–strain behavior of Ti64 alloy and three virtual materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Universidad de La Frontera, Temuco 4811230, Chile.
- Doctoral Program in Sciences of Natural Resources, Universidad de La Frontera, Temuco 4811230, Chile.
- Centro de Excelencia de Modelación y Computación Científica, Universidad de La Frontera, Temuco 4811322, Chile.
- Department of Mechanical Engineering, Faculty of Engineering, University of Concepción, Concepción 4070138, Chile.
- Department of Industrial Technologies, Faculty of Engineering, Universidad of Talca, Curicó 3340000, Chile.
- Department of Mechanical Engineering, Faculty of Engineering, Universidad del Bío-Bío, Concepción 4081112, Chile.
ORCID-Profile: Víctor Tuninetti, Carlos Medina, Gonzalo Pincheira, Alexis Salas, Angelo Oñate
Förderung
- DIUFRO
- Universidad de La Frontera
Zitieren
APA
Tuninetti, V., Forcael, D., Valenzuela, M., Martínez, A., Ávila, A., Medina, C., Pincheira, G., Salas, A., Oñate, A., & Duchêne, L. (2024). Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling. Materials, 17(2), 317. https://doi.org/10.3390/ma17020317
Vancouver
Tuninetti V, Forcael D, Valenzuela M, Martínez A, Ávila A, Medina C, et al. Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling. Materials. 2024;17(2):317. doi:10.3390/ma17020317
BibTeX
@article{Tuninetti2024,
author = {Tuninetti, Víctor and Forcael, Diego and Valenzuela, Marian and Martínez, Alex and Ávila, Andrés and Medina, Carlos and Pincheira, Gonzalo and Salas, Alexis and Oñate, Angelo and Duchêne, Laurent},
title = {Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling},
journal = {Materials},
year = {2024},
volume = {17},
number = {2},
pages = {317},
doi = {10.3390/ma17020317}
}
EUVIMED