EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Microstructural Evolution and Corrosion Behavior of Zn-Mg Alloys and Hybrids Processed Using High-Pressure Torsion

Ayoub Tanji iD, Hendra Hermawan iD, Carl J Boehlert iD

Materials · 04.01.2024 · 17 (1) · 270

DOI: 10.3390/ma17010270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.01.2024. Verfasst von Ayoub Tanji und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mining, Metallurgical and Materials Engineering, Laval University, Quebec City, QC G1V 0A6, Canada. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation Division of Engineering, Natural Sciences and Engineering Research Council of Canada (NSERC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zinc (Zn) alloys, particularly those incorporating magnesium (Mg), have been explored as potential bioabsorbable metals. However, there is a continued need to enhance the corrosion characteristics of Zn-Mg alloys to fulfill the requirements for biodegradable implants. This work involves a corrosion behavior comparison between severe-plastic-deformation (SPD) processed cast Zn-Mg alloys and their hybrid counterparts, having equivalent nominal compositions. The SPD processing technique used was high-pressure torsion (HPT), and the corrosion behavior was studied as a function of the number of turns (1, 5, 15) for the Zn-3Mg (wt.%) alloy and hybrid and as a function of composition (Mg contents of 3, 10, 30 wt.%) for the hybrid after 15 turns. The results indicated that HPT led to multimodal grain size distributions of ultrafine Mg-rich grains containing MgZn2 and Mg2Zn11 nanoscale intermetallics in a matrix of coarser dislocation-free Zn-rich grains. A greater number of turns resulted in greater corrosion resistance because of the formation of the intermetallic phases. The HPT hybrid was more corrosion resistant than its alloy counterpart because it tended to form the intermetallics more readily than the alloy due to the inhomogeneous conditions of the materials before the HPT processing as well as the non-equilibrium conditions imposed during the HPT processing. The HPT hybrids with greater Mg contents were less corrosion resistant because the addition of Mg led to less noble behavior.

Schlagwörter

Stichwörter der Autor:innen

corrosionmicrostructuresevere plastic deformation

Autor:innen und Institutionen

  • Department of Mining, Metallurgical and Materials Engineering, Laval University, Quebec City, QC G1V 0A6, Canada.
  • Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, MI 48824, USA.

ORCID-Profile: Ayoub Tanji, Hendra Hermawan, Carl J Boehlert

Förderung

  • National Science Foundation Division of Engineering
  • Natural Sciences and Engineering Research Council of Canada (NSERC)

Zitieren

APA

Tanji, A., Hermawan, H., & Boehlert, C. J. (2024). The Microstructural Evolution and Corrosion Behavior of Zn-Mg Alloys and Hybrids Processed Using High-Pressure Torsion. Materials, 17(1), 270. https://doi.org/10.3390/ma17010270

Vancouver

Tanji A, Hermawan H, Boehlert CJ. The Microstructural Evolution and Corrosion Behavior of Zn-Mg Alloys and Hybrids Processed Using High-Pressure Torsion. Materials. 2024;17(1):270. doi:10.3390/ma17010270

BibTeX
@article{Tanji2024,
  author = {Tanji, Ayoub and Hermawan, Hendra and Boehlert, Carl J},
  title = {The Microstructural Evolution and Corrosion Behavior of Zn-Mg Alloys and Hybrids Processed Using High-Pressure Torsion},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {1},
  pages = {270},
  doi = {10.3390/ma17010270}
}
Kostenlos starten →