EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Properties, Microstructure Development and Life Cycle Assessment of Alkali-Activated Materials Containing Steel Slag under Different Alkali Equivalents

Xin Ji, Xiaofeng Wang, Xin Zhao, Zhenjun Wang, Haibao Zhang, Jianfei Liu

Materials · 22.12.2023 · 17 (1) · 48

DOI: 10.3390/ma17010048 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.12.2023. Verfasst von Xin Ji und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Transportation Technology Project, Science and Technology Development Project of Xinjiang Production and Construction Corps, Project for High Level Talents in Henan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve solid waste resource utilization and environmental sustainability, an alkali-activated material (AAM) was prepared using steel slag (SS), fly ash, blast furnace slag and alkali activators in this work. The evolutions of SS content (10–50%) and alkali equivalent (4.0–8.0%) on workability, mechanical strength and environmental indicators of the AAM were investigated. Furthermore, scanning electron microscopy, X-ray diffraction and nuclear magnetic resonance techniques were adopted to characterize micromorphology, reaction products and pore structure, and the reaction mechanism was summarized. Results showed that the paste fluidity and setting time gradually increased with the increase in SS content. The highest compressive strength was obtained for the paste at 8.0% alkali equivalent due to the improved reaction rate and process, but it also increased the risk of cracking. However, SS was able to exert a microaggregate filling effect, where SS particles filling the pores increased the structural compactness and hindered crack development. Based on the optimal compressive strength, global warming, abiotic resource depletion, acidification and eutrophication potential of the paste are reduced by 76.7%, 53.0%, 51.6%, and 48.9%, respectively, compared with cement. This work is beneficial to further improve the utilization of solid waste resources and expand the application of environmentally friendly AAMs in the field of construction engineering.

Schlagwörter

Stichwörter der Autor:innen

alkali equivalentalkali-activated materialsenvironmentally friendlymicrostructurepropertiessteel slag

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China.
  • Henan Provincial Communications Planning & Design Institute, Zhengzhou 450052, China.
  • Shaanxi Provincial Communications Planning & Design Institute, Xi'an 710065, China.
  • Xi'an Key Laboratory of Modern Transportation Function Materials, Xi'an 710064, China.

Förderung

  • Shaanxi Transportation Technology Project
  • Science and Technology Development Project of Xinjiang Production and Construction Corps
  • Project for High Level Talents in Henan Province

Zitieren

APA

Ji, X., Wang, X., Zhao, X., Wang, Z., Zhang, H., & Liu, J. (2023). Properties, Microstructure Development and Life Cycle Assessment of Alkali-Activated Materials Containing Steel Slag under Different Alkali Equivalents. Materials, 17(1), 48. https://doi.org/10.3390/ma17010048

Vancouver

Ji X, Wang X, Zhao X, Wang Z, Zhang H, Liu J. Properties, Microstructure Development and Life Cycle Assessment of Alkali-Activated Materials Containing Steel Slag under Different Alkali Equivalents. Materials. 2023;17(1):48. doi:10.3390/ma17010048

BibTeX
@article{Ji2023,
  author = {Ji, Xin and Wang, Xiaofeng and Zhao, Xin and Wang, Zhenjun and Zhang, Haibao and Liu, Jianfei},
  title = {Properties, Microstructure Development and Life Cycle Assessment of Alkali-Activated Materials Containing Steel Slag under Different Alkali Equivalents},
  journal = {Materials},
  year = {2023},
  volume = {17},
  number = {1},
  pages = {48},
  doi = {10.3390/ma17010048}
}
Kostenlos starten →