EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deformation Mechanisms of Magnesium Alloys with Rare-Earth and Zinc Additions under Plane Strain Compression

Xun Zeng, Sangbong Yi

Materials · 21.12.2023 · 17 (1) · 33

DOI: 10.3390/ma17010033 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.12.2023. Verfasst von Xun Zeng und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Southampton, Southampton SO17 1BJ, UK. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The introduction of rare-earth (RE) elements into magnesium (Mg) alloys can significantly improve their ductility, thereby extending the applications of Mg products. However, the impacts of their chemical composition, temperature and processing methods on the mechanical properties of Mg products are highly debatable. In this work, we systematically investigate the deformation behaviors of Mg–Nd and Mg–Zn–Nd alloys using electron backscattered diffraction (EBSD) characterization. The samples were deformed to different stress levels to study the microstructure and texture development during channel die compression. The results reveal that the room temperature formability of the Mg–Nd alloy can be enhanced with the addition of Zn. This is attributed to the higher activities of prismatic slip and tensile twinning in the Mg–Zn–Nd alloy as compared to the binary counterpart, facilitating strain accommodation. When the strain increases, the growing and merging of the same twin variant rapidly consumes the parent grain, which is responsible for the texture modification from the transverse to the basal direction. At elevated temperatures, the twinning is suppressed in both alloys due to the decreased critical resolved shear stress of the non-basal slip systems. Additionally, an obvious sigmoidal yielding phenomenon is observed due to the multiple activation of the different deformation modes. These findings offer valuable insights into the evolution of the microstructure and texture during plane strain compression, elucidating the connections between material chemical composition, processing and mechanical properties, which are important for the advancement of Mg alloy application.

Schlagwörter

Stichwörter der Autor:innen

dislocation slipmagnesium alloystexturetwinning

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Southampton, Southampton SO17 1BJ, UK.
  • Institute of Materials and Process Design, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany.

Förderung

  • China Scholarship Council

Zitieren

APA

Zeng, X., & Yi, S. (2023). Deformation Mechanisms of Magnesium Alloys with Rare-Earth and Zinc Additions under Plane Strain Compression. Materials, 17(1), 33. https://doi.org/10.3390/ma17010033

Vancouver

Zeng X, Yi S. Deformation Mechanisms of Magnesium Alloys with Rare-Earth and Zinc Additions under Plane Strain Compression. Materials. 2023;17(1):33. doi:10.3390/ma17010033

BibTeX
@article{Zeng2023,
  author = {Zeng, Xun and Yi, Sangbong},
  title = {Deformation Mechanisms of Magnesium Alloys with Rare-Earth and Zinc Additions under Plane Strain Compression},
  journal = {Materials},
  year = {2023},
  volume = {17},
  number = {1},
  pages = {33},
  doi = {10.3390/ma17010033}
}
Kostenlos starten →