Research the Dimensional Accuracy of C45 Steel Ring Forgings Produced by Radial Rolling
Materials · 19.12.2023 · 17 (1) · 3
DOI: 10.3390/ma17010003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.12.2023. Verfasst von Andrzej Gontarz und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Lublin University of Technology, 20-618 Lublin, Poland. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The rolling process of rings is a commonly used method for producing annular forgings. There are two primary types of this process: radial-axial rolling and radial rolling. This article presents the research results regarding the latter, in which obtaining a product with the assumed dimensions constitutes a major problem. In industrial practice, the process parameters are based on the experience of technologists and/or by trial and error. This is why the authors considered it justified to undertake the research aimed at determining the influence of the main process parameters, that is, preform temperature and tool speed, on the shape and dimensions of the cross-section, which determine the internal and external diameters of the rolled ring. The research was based on numerical simulations and experimental studies. The results obtained proved that the higher the feed speed of the main roll, the greater the change in the cross-sectional height during rolling, and the smaller the cross-sectional deformation (the so-called fishtail). Nevertheless, a higher preform temperature reduces the final height of the ring and reduces cross-section deformation. On the basis of the obtained test results, guidelines for the process design were postulated, considering the influence of temperature and speed parameters on the final dimensions of the forging and the dimensions of the preform.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Lublin University of Technology, 20-618 Lublin, Poland.
- Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, 42-201 Czestochowa, Poland.
ORCID-Profile: Andrzej Gontarz, Piotr Surdacki, Jacek Michalczyk
Zitieren
APA
Gontarz, A., Surdacki, P., & Michalczyk, J. (2023). Research the Dimensional Accuracy of C45 Steel Ring Forgings Produced by Radial Rolling. Materials, 17(1), 3. https://doi.org/10.3390/ma17010003
Vancouver
Gontarz A, Surdacki P, Michalczyk J. Research the Dimensional Accuracy of C45 Steel Ring Forgings Produced by Radial Rolling. Materials. 2023;17(1):3. doi:10.3390/ma17010003
BibTeX
@article{Gontarz2023,
author = {Gontarz, Andrzej and Surdacki, Piotr and Michalczyk, Jacek},
title = {Research the Dimensional Accuracy of C45 Steel Ring Forgings Produced by Radial Rolling},
journal = {Materials},
year = {2023},
volume = {17},
number = {1},
pages = {3},
doi = {10.3390/ma17010003}
}
EUVIMED