Comparison of Coupled Electrochemical and Thermal Modelling Strategies of 18650 Li-Ion Batteries in Finite Element Analysis—A Review
Materials · 12.12.2023 · 16 (24) · 7613
DOI: 10.3390/ma16247613 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 12.12.2023. Verfasst von Bence Csomós und 2 weiteren Autor:innen. Beteiligte Einrichtung: Research and Development Center of Technical Sciences, University of Pannonia, H-8200 Veszprem, Hungary. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The specificities of temperature-dependent electrochemical modelling strategies of 18650 Li-ion batteries were investigated in pseudo-2D, 2D and 3D domains using finite element analysis. Emphasis was placed on exploring the challenges associated with the geometric representation of the batteries in each domain, as well as analysing the performance of coupled thermal-electrochemical models. The results of the simulations were compared with real reference measurements, where temperature data were collected using temperature sensors and a thermal camera. It was highlighted that the spiral geometry provides the most realistic results in terms of the temperature distribution, as its layered structure allows for a detailed realisation of the radial heat transfer within the cell. On the other hand, the 3D-lumped thermal model is able to recover the temperature distribution in the axial direction of the cell and to reveal the influence of the cell cap and the cell wall on the thermal behaviour of the cell. The effect of cooling is an important factor that can be introduced in the models as a boundary condition by heat convection or heat flux. It has been shown that both regulated and unregulated (i.e., natural) cooling conditions can be achieved using an appropriate choice of the rate and type of cooling applied.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research and Development Center of Technical Sciences, University of Pannonia, H-8200 Veszprem, Hungary.
- E-Mobility Research Center, Department of Power Electronics and Electric Drives, Audi Hungaria Faculty of Automotive Engineering, Széchenyi István University, H-9026 Gyor, Hungary.
- Department of Road and Rail Vehicles, Audi Hungaria Faculty of Automotive Engineering, Széchenyi István University, H-9026 Gyor, Hungary.
ORCID-Profile: Bence Csomós, Szabolcs Kocsis Szürke
Zitieren
APA
Csomós, B., Kocsis Szürke, S., & Fodor, D. (2023). Comparison of Coupled Electrochemical and Thermal Modelling Strategies of 18650 Li-Ion Batteries in Finite Element Analysis—A Review. Materials, 16(24), 7613. https://doi.org/10.3390/ma16247613
Vancouver
Csomós B, Kocsis Szürke S, Fodor D. Comparison of Coupled Electrochemical and Thermal Modelling Strategies of 18650 Li-Ion Batteries in Finite Element Analysis—A Review. Materials. 2023;16(24):7613. doi:10.3390/ma16247613
BibTeX
@article{Csoms2023,
author = {Csomós, Bence and Kocsis Szürke, Szabolcs and Fodor, Dénes},
title = {Comparison of Coupled Electrochemical and Thermal Modelling Strategies of 18650 Li-Ion Batteries in Finite Element Analysis—A Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {24},
pages = {7613},
doi = {10.3390/ma16247613}
}
EUVIMED