EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of High-Remanence Nd-Fe-B Hot-Pressed Magnets by Manipulating Coercivity of Hydrogenation-Disproportionation-Desorption-Recombination Treated Anisotropic Precursors

Jae-Gyeong Yoo, Tae-Hoon Kim, Hee-Ryoung Cha, Yang-Do Kim iD, Jung-Goo Lee iD

Materials · 11.12.2023 · 16 (24) · 7599

DOI: 10.3390/ma16247599 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.12.2023. Verfasst von Jae-Gyeong Yoo und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Magnetic Materials, Korea Institute of Materials Science, Changwon 51508, Republic of Korea. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Evaluation Institute of Industrial Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We propose a method of manipulating the coercivity of anisotropic hydrogenation-disproportionation-desorption-recombination (HDDR) powders to fabricate high-remanence and fine-grained Nd-Fe-B magnets using only hot-pressing without a subsequent hot-deformation process. By reducing the Nd content of anisotropic HDDR precursors such that their coercivity (Hcj) is lowered, the c-axis of each HDDR particle is well-aligned parallel to the direction of the applied magnetic field during the magnetic alignment step. This is because the magnetic repulsive force between adjacent particles, determined by their remanent magnetization, decreases as a result of the low coercivity of each particle. Therefore, after hot-pressing the low-Hcj HDDR powders, a significantly higher remanence (11.2 kG) is achieved in the bulk than that achieved by hot-pressing the high-Hcj HDDR powders (8.2 kG). It is clearly confirmed by the large-scale electron backscatter diffraction (EBSD) analysis that the alignment of the c-axis of each anisotropic HDDR particle in the bulk is improved when low-Hcj HDDR powders are used to fabricate hot-pressed magnets. This coercivity manipulation of HDDR powders can be a helpful method to expand the use of HDDR powders in fabricating anisotropic Nd-Fe-B bulk magnets.

Schlagwörter

Stichwörter der Autor:innen

HDDR powdersNd-Fe-B permanent magnetshot-press processmagnetic alignment process

Autor:innen und Institutionen

  • Department of Magnetic Materials, Korea Institute of Materials Science, Changwon 51508, Republic of Korea.
  • Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea.

ORCID-Profile: Yang-Do Kim, Jung-Goo Lee

Förderung

  • Korea Evaluation Institute of Industrial Technology

Zitieren

APA

Yoo, J. G., Kim, T. H., Cha, H. R., Kim, Y. D., & Lee, J. G. (2023). Design of High-Remanence Nd-Fe-B Hot-Pressed Magnets by Manipulating Coercivity of Hydrogenation-Disproportionation-Desorption-Recombination Treated Anisotropic Precursors. Materials, 16(24), 7599. https://doi.org/10.3390/ma16247599

Vancouver

Yoo JG, Kim TH, Cha HR, Kim YD, Lee JG. Design of High-Remanence Nd-Fe-B Hot-Pressed Magnets by Manipulating Coercivity of Hydrogenation-Disproportionation-Desorption-Recombination Treated Anisotropic Precursors. Materials. 2023;16(24):7599. doi:10.3390/ma16247599

BibTeX
@article{Yoo2023,
  author = {Yoo, Jae-Gyeong and Kim, Tae-Hoon and Cha, Hee-Ryoung and Kim, Yang-Do and Lee, Jung-Goo},
  title = {Design of High-Remanence Nd-Fe-B Hot-Pressed Magnets by Manipulating Coercivity of Hydrogenation-Disproportionation-Desorption-Recombination Treated Anisotropic Precursors},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {24},
  pages = {7599},
  doi = {10.3390/ma16247599}
}
Kostenlos starten →