EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation, Characterization, and Properties of UV-Curable Coating Doped with Nano-SiO2

Tianlei Chen, Rong Zhong, Zhengjie Wang

Materials · 09.12.2023 · 16 (24) · 7576

DOI: 10.3390/ma16247576 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.12.2023. Verfasst von Tianlei Chen und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Chemistry, School of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a hydrophobic, wear-resistant ultraviolet (UV)-curable coating was investigated as an alternative to traditional coatings with low hardness and high susceptibility to scratching. The SiO2 nanoparticles were ground and modified using high-energy ball milling, during which the surface energy of nano-SiO2 particles rapidly increased as their particle size decreased. Different proportions of modified nano-SiO2 particles were added to the coating and cured into a film. The structure of the composite coating was analyzed via infrared spectroscopy, scanning electron microscopy, and X-ray diffraction, which confirmed the successful preparation of the composite coating. The mechanical and optical property tests of the coating were investigated. With a 5% nano-SiO2 content, the hardness of the coating reached 5H, whereas the adhesion was poor (2B), and the flexibility was 1. The overall comprehensive performance of the coating was best when the addition amount was 3%. The coating exhibited good hardness, flexibility, and adhesion. The hardness of the coating reached 4H, the adhesion was 4B, the flexibility was 5, the coating haze was 12.38 HZ, and the contact angle was 118°.

Schlagwörter

Stichwörter der Autor:innen

UV-curable coatinghigh-energy ball millingnano-SiO2 modificationorganic–inorganic composite coating

Autor:innen und Institutionen

  • Department of Materials Chemistry, School of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, T., Zhong, R., & Wang, Z. (2023). Preparation, Characterization, and Properties of UV-Curable Coating Doped with Nano-SiO2. Materials, 16(24), 7576. https://doi.org/10.3390/ma16247576

Vancouver

Chen T, Zhong R, Wang Z. Preparation, Characterization, and Properties of UV-Curable Coating Doped with Nano-SiO2. Materials. 2023;16(24):7576. doi:10.3390/ma16247576

BibTeX
@article{Chen2023,
  author = {Chen, Tianlei and Zhong, Rong and Wang, Zhengjie},
  title = {Preparation, Characterization, and Properties of UV-Curable Coating Doped with Nano-SiO2},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {24},
  pages = {7576},
  doi = {10.3390/ma16247576}
}
Kostenlos starten →