EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lithium Slag and Solid Waste-Based Binders for Cemented Lithium Mica Fine Tailings Backfill

Jiafeng Li, Jinsong Huang, Yali Hu, Daopei Zhu

Materials · 09.12.2023 · 16 (24) · 7572

DOI: 10.3390/ma16247572 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.12.2023. Verfasst von Jiafeng Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Surveying & Mapping Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jiangxi Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To mitigate the adverse effects of fine-grained lithium mica tailings and other solid wastes generated from the extraction of lithium ore mining, as well as the limitations of traditional cement-based binders for lithium mica fine tailings, this study explores the feasibility of using a binder composed of ordinary Portland cement, lithium slag, fly ash, and desulfurization gypsum to stabilize lithium fine tailings into cemented lithium tailings backfill. Compared with traditional cementitious binders, an extensive array of experiments and analyses were conducted on binders formed by various material proportion combinations, employing uniaxial compressive strength tests, microstructural morphology, grayscale analyses, and flowability tests. The results show the following: (1) In this study, an LSB binder exhibiting superior mechanical properties compared to traditional cementitious binders was identified, with an optimal OPC:LS:FA:DG ratio of 2:1:1:1. (2) In the context of cemented lithium mica fine tailings, the LSB-CLTB material exhibits higher unconfined compressive strength and lower self-weight compared to OPC-CLTB materials. At a binder content of 10 wt%, the UCS values achieved by the LSB-CLTB material at curing periods of 7 days, 14 days, and 28 days are 0.97 MPa, 1.52 MPa, and 2.1 MPa, respectively, representing increases of 40.6%, 34.5%, and 44.8% over the compressive strength of OPC-based materials under the same conditions. (3) The LSB binder not only exhibits enhanced pozzolanic reactivity but also facilitates the infilling of detrimental pores through its inherent particle size and the formation of AFt and C-(A)-S-H gels via hydration reactions, thereby effectively improving the compressive strength performance of fine-grained tailings backfill.

Schlagwörter

Stichwörter der Autor:innen

cementitious materialindustrial solid wasteslithium mica fine tailingslithium slaguniaxial compression test

Autor:innen und Institutionen

  • School of Civil and Surveying & Mapping Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China.
  • Zhejiang Zhipu Engineering Technology Co., Ltd., Huzhou 313000, China.

Förderung

  • Natural Science Foundation of Jiangxi Province, China

Zitieren

APA

Li, J., Huang, J., Hu, Y., & Zhu, D. (2023). Lithium Slag and Solid Waste-Based Binders for Cemented Lithium Mica Fine Tailings Backfill. Materials, 16(24), 7572. https://doi.org/10.3390/ma16247572

Vancouver

Li J, Huang J, Hu Y, Zhu D. Lithium Slag and Solid Waste-Based Binders for Cemented Lithium Mica Fine Tailings Backfill. Materials. 2023;16(24):7572. doi:10.3390/ma16247572

BibTeX
@article{Li2023,
  author = {Li, Jiafeng and Huang, Jinsong and Hu, Yali and Zhu, Daopei},
  title = {Lithium Slag and Solid Waste-Based Binders for Cemented Lithium Mica Fine Tailings Backfill},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {24},
  pages = {7572},
  doi = {10.3390/ma16247572}
}
Kostenlos starten →