EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Anti-Corrosion Performance of Co-Cr-Mo Alloy in Molten Al by Prior Oxidation Treatment

Rongrong Shang, Biaobiao Yang, Yunping Li iD

Materials · 30.11.2023 · 16 (23) · 7449

DOI: 10.3390/ma16237449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.11.2023. Verfasst von Rongrong Shang und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410017, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Co-based alloys are promising alternatives to replace the currently used tool steels in aluminum die-casting molds for producing sophisticated products. Although the reaction is significantly less severe compared to that of tool steels, bare Co-29Cr-6Mo (CCM) alloy is still gradually corroded under molten Al, leading to the local failure of the alloy due to the formation of intermetallic compounds between the matrix and molten Al. This study indicated that prior oxidation treatment at 750 °C on CCM alloy is beneficial in enhancing the corrosion resistance of the alloy to molten Al. The is more pronounced in the alloy after a longer oxidation treatment. However, after oxidation for longer than 24 h, the protectiveness of the film cannot be enhanced anymore. In addition, even after the full failure of the oxide film, the thickness loss rate of a sample with prior oxidation treatment is much lower than that of a bare sample. This can be attributed to the fact that network-aligned oxide particles of the cone structure boundary inhibit both the outwards movements of alloying elements and the dissolution of the intermetallic layer.

Schlagwörter

Stichwörter der Autor:innen

cobalt-based alloycorrosioninterfacesmolten Aloxide film

Autor:innen und Institutionen

  • State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410017, China.
  • IMDEA Materials Institute, C/Eric Kandel 2, Getafe, 28906 Madrid, Spain.
  • Department of Materials Science, Escuela Técnica Superior de Ingenieros de Caminos, Polytechnic University of Madrid, 28040 Madrid, Spain.

ORCID-Profile: Yunping Li

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Shang, R., Yang, B., & Li, Y. (2023). Enhanced Anti-Corrosion Performance of Co-Cr-Mo Alloy in Molten Al by Prior Oxidation Treatment. Materials, 16(23), 7449. https://doi.org/10.3390/ma16237449

Vancouver

Shang R, Yang B, Li Y. Enhanced Anti-Corrosion Performance of Co-Cr-Mo Alloy in Molten Al by Prior Oxidation Treatment. Materials. 2023;16(23):7449. doi:10.3390/ma16237449

BibTeX
@article{Shang2023,
  author = {Shang, Rongrong and Yang, Biaobiao and Li, Yunping},
  title = {Enhanced Anti-Corrosion Performance of Co-Cr-Mo Alloy in Molten Al by Prior Oxidation Treatment},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {23},
  pages = {7449},
  doi = {10.3390/ma16237449}
}
Kostenlos starten →