Investigation of Different Features for Baseline-Free RAPID Damage-Imaging Algorithm Using Guided Waves Applied to Metallic and Composite Plates
Materials · 28.11.2023 · 16 (23) · 7390
DOI: 10.3390/ma16237390 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.11.2023. Verfasst von Aadhik Asokkumar und 4 weiteren Autor:innen. Beteiligte Einrichtung: Prof. K. Baršauskas Ultrasound Research Institute, Kaunas University of Technology, K. Baršausko St. 59, 51423 Kaunas, Lithuania. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: "GW4SHM" from the H2020 Research and Innovation program under the Marie Skłodowska-Curie, “GW4SHM” project, part of the European Union’s Horizon 2020 Research and Innovation program.
Abstract (Originalsprache)
In guided-wave-based damage-imaging algorithms, damage reconstruction typically involves comparing the signals with and without a defect. However, in many cases, defect-free data may not be available. Therefore, in this study, baseline and baseline-free approaches were used for damage imaging, exploiting not only the amplitude of the signal as the feature but also five additional features, namely, the amplitude of the sparse signal after deconvolution, the amplitude of the coefficients at the excitation frequency from the re-assigned short-time Fourier transform, the time of flight determined from cross-correlation, kurtosis in the time domain, and kurtosis in the frequency domain. For this study, three different plates with different types of defects were considered: a metallic plate with a notch-type artificial defect, a pultruded type of composite plate with an impact defect, and a laminate composite plate with plexiglass serving as an added mass damper artificial defect. The Reconstruction Algorithm for Probabilistic Inspection of Damage (the RAPID algorithm) was used to characterize the defects on the three plates, and the defect parameters were then quantified by creating an ellipse after thresholding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Prof. K. Baršauskas Ultrasound Research Institute, Kaunas University of Technology, K. Baršausko St. 59, 51423 Kaunas, Lithuania.
- Instituto de Telecomunicações, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisbon, Portugal.
ORCID-Profile: Renaldas Raišutis, Dario J Pasadas, Vykintas Samaitis
Förderung
- "GW4SHM" from the H2020 Research and Innovation program under the Marie Skłodowska-Curie
- “GW4SHM” project, part of the European Union’s Horizon 2020 Research and Innovation program
Zitieren
APA
Asokkumar, A., Raišutis, R., Pasadas, D. J., Samaitis, V., & Mažeika, L. (2023). Investigation of Different Features for Baseline-Free RAPID Damage-Imaging Algorithm Using Guided Waves Applied to Metallic and Composite Plates. Materials, 16(23), 7390. https://doi.org/10.3390/ma16237390
Vancouver
Asokkumar A, Raišutis R, Pasadas DJ, Samaitis V, Mažeika L. Investigation of Different Features for Baseline-Free RAPID Damage-Imaging Algorithm Using Guided Waves Applied to Metallic and Composite Plates. Materials. 2023;16(23):7390. doi:10.3390/ma16237390
BibTeX
@article{Asokkumar2023,
author = {Asokkumar, Aadhik and Raišutis, Renaldas and Pasadas, Dario J and Samaitis, Vykintas and Mažeika, Liudas},
title = {Investigation of Different Features for Baseline-Free RAPID Damage-Imaging Algorithm Using Guided Waves Applied to Metallic and Composite Plates},
journal = {Materials},
year = {2023},
volume = {16},
number = {23},
pages = {7390},
doi = {10.3390/ma16237390}
}
EUVIMED