EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Control of the Composition and Morphology of Non-Metallic Inclusions in Superduplex Stainless Steel

Andrey Zhitenev iD, Vladimir Karasev, Aleksandr Fedorov iD, Sergey Ryaboshuk, Alexey Alkhimenko

Materials · 25.11.2023 · 16 (23) · 7337

DOI: 10.3390/ma16237337 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.11.2023. Verfasst von Andrey Zhitenev und 4 weiteren Autor:innen. Beteiligte Einrichtung: Scientific and Technical Complex "New Technologies and Materials", Peter the Great St. Petersburg Polytechnic University, 195251 St. Petersburg, Russ…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The research was financially supported by the Ministry of Science and Higher Education of the Russian Federation under the World Class Research Centre Program:…, Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Duplex stainless steel is a unique material for cast products, the use of which is possible in various fields. With the same chemical composition, melting, casting and heat treatment technology, pitting and crevice corrosion were observed at the interphase boundaries of non-metallic inclusions and the steel matrix. To increase the cleanliness of steel, it is necessary to carefully select the technology for deoxidizing with titanium or aluminum, as the most common deoxidizers, and the technology for modifying with rare earth metals. In this work, a comprehensive analysis of the thermodynamic data in the literature on the behavior of oxides and sulfides in this highly alloyed system under consideration was performed. Based on this analysis, a thermodynamic model was developed to describe their behavior in liquid and solidified duplex stainless steels. The critical concentrations at which the existence of certain phases is possible during the deoxidation of DSS with titanium, aluminum and modification by rare earth metals, including the simultaneous contribution of lanthanum and cerium, was determined. Experimental ingots were produced, the cleanliness of experimental steels was assessed, and the key metric parameters of non-metallic inclusions were described. In steels deoxidized using titanium, clusters of inclusions with a diameter of 84 microns with a volume fraction of 0.066% were formed, the volume fraction of which was decreased to 0.01% with the subsequent addition of aluminum. The clusters completely disappeared when REMs were added. The reason for this behavior of inclusions was interpreted using thermodynamic modeling and explained by the difference in temperature at which specific types of NMIs begin to form. A comparison of experimental and calculated results showed that the proposed model adequately describes the process of formation of non-metallic inclusions in the steel under consideration and can be used for the development of industrial technology.

Schlagwörter

Stichwörter der Autor:innen

aluminumceriumcleanlinessdeoxidation technologyduplex stainless steelsinduction furnacelanthanummodificationnon-metallic inclusionsstability diagramthermodynamic modelingtitanium

Autor:innen und Institutionen

  • Scientific and Technical Complex "New Technologies and Materials", Peter the Great St. Petersburg Polytechnic University, 195251 St. Petersburg, Russia.
  • Institute of Machinery, Materials, and Transport, Peter the Great St. Petersburg Polytechnic University, 195251 St. Petersburg, Russia.

ORCID-Profile: Andrey Zhitenev, Aleksandr Fedorov

Förderung

  • The research was financially supported by the Ministry of Science and Higher Education of the Russian Federation under the World Class Research Centre Program:…
  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Zhitenev, A., Karasev, V., Fedorov, A., Ryaboshuk, S., & Alkhimenko, A. (2023). Control of the Composition and Morphology of Non-Metallic Inclusions in Superduplex Stainless Steel. Materials, 16(23), 7337. https://doi.org/10.3390/ma16237337

Vancouver

Zhitenev A, Karasev V, Fedorov A, Ryaboshuk S, Alkhimenko A. Control of the Composition and Morphology of Non-Metallic Inclusions in Superduplex Stainless Steel. Materials. 2023;16(23):7337. doi:10.3390/ma16237337

BibTeX
@article{Zhitenev2023,
  author = {Zhitenev, Andrey and Karasev, Vladimir and Fedorov, Aleksandr and Ryaboshuk, Sergey and Alkhimenko, Alexey},
  title = {Control of the Composition and Morphology of Non-Metallic Inclusions in Superduplex Stainless Steel},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {23},
  pages = {7337},
  doi = {10.3390/ma16237337}
}
Kostenlos starten →