EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyurethane Adhesives for Wood Based on a Simple Mixture of Castor Oil and Crude Glycerin

Tábata Larissa Corrêa Peres, Felipe Vahl Ribeiro, Arthur Behenck Aramburu iD, Kelvin Techera Barbosa iD, Andrey Pereira Acosta iD, André Luiz Missio iD, Mahbube Subhani iD, Rafael de Avila Delucis iD

Materials · 21.11.2023 · 16 (23) · 7251

DOI: 10.3390/ma16237251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.11.2023. Verfasst von Tábata Larissa Corrêa Peres und 7 weiteren Autor:innen. Beteiligte Einrichtung: Postgraduate Program in Materials Science and Engineering, Federal University of Pelotas, Pelotas 96010-150, RS, Brazil. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brazilian National Council for Scientific and Technological Development (CNPq), Brazilian National Council for Scientific and Technological Development—CNPq.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing a new type of polyurethane is essential because conventional options often exhibit shortcomings in terms of environmental sustainability, cost-effectiveness, and performance in specialized applications. A novel polyurethane adhesive derived from a simple mixture of castor oil (CO) and crude glycerin (CG) holds promise as it reduces reliance on fossil fuels and harnesses renewable resources, making it environmentally friendly. Simple CO/CG mixtures, adjusted at three different weight fractions, were used as bio-based polyester polyols to produce polyurethane adhesive for wood bonding. The resulting products are yellowish liquids with moderate-to-high viscosity, measuring 19,800–21,000 cP at 25 °C. The chemical structure of the polyester polyols was characterized using infrared spectroscopy (FTIR), thermogravimetry (TG), and differential scanning calorimetry (DSC). These polyols reacted with polymeric 4,4-methylene diphenyl diisocyanate (p-MDI) at a consistent isocyanate index of 1.3, resulting in the formation of polyurethane adhesives. Crucially, all final adhesives met the adhesive strength requirements specified by ASTM D-5751 standards, underscoring their suitability for wood bonding applications. The addition of CG enhanced the surface and volumetric hydrophobicity of the cured adhesives, resulting in adhesive properties that are not only stronger but also more weather-resistant. Although the thermal stability of the adhesives decreased with the inclusion of CG, FTIR analysis confirmed proper polyurethane polymer formation. The adhesive adjusted for a 2:1 CO:CG weight ratio promoted wood–wood bonding with the highest shear strength, likely due to a higher formation of urethane linkages between hydroxyl groups from the blend of polyols and isocyanate groups from the p-MDI.

Schlagwörter

Stichwörter der Autor:innen

bio-polyolscrude glycerinrenewable resourceswood bonding

Autor:innen und Institutionen

  • Postgraduate Program in Materials Science and Engineering, Federal University of Pelotas, Pelotas 96010-150, RS, Brazil.
  • Engineering Centre, Federal University of Pelotas, Pelotas 96010-610, RS, Brazil.
  • Postgraduate Program in Mining, Metallurgical and Materials Engineering, Federal University of Rio Grande do Sul, Porto Alegre 91540-000, RS, Brazil.
  • School of Engineering, Deakin University, Melbourne, VIC 3216, Australia.

ORCID-Profile: Arthur Behenck Aramburu, Kelvin Techera Barbosa, Andrey Pereira Acosta, André Luiz Missio, Mahbube Subhani, Rafael de Avila Delucis

Förderung

  • Brazilian National Council for Scientific and Technological Development (CNPq)
  • Brazilian National Council for Scientific and Technological Development—CNPq

Zitieren

APA

Peres, T. L. C., Ribeiro, F. V., Aramburu, A. B., Barbosa, K. T., Acosta, A. P., Missio, A. L., Subhani, M., & Delucis, R. A. (2023). Polyurethane Adhesives for Wood Based on a Simple Mixture of Castor Oil and Crude Glycerin. Materials, 16(23), 7251. https://doi.org/10.3390/ma16237251

Vancouver

Peres TLC, Ribeiro FV, Aramburu AB, Barbosa KT, Acosta AP, Missio AL, et al. Polyurethane Adhesives for Wood Based on a Simple Mixture of Castor Oil and Crude Glycerin. Materials. 2023;16(23):7251. doi:10.3390/ma16237251

BibTeX
@article{Peres2023,
  author = {Peres, Tábata Larissa Corrêa and Ribeiro, Felipe Vahl and Aramburu, Arthur Behenck and Barbosa, Kelvin Techera and Acosta, Andrey Pereira and Missio, André Luiz and Subhani, Mahbube and Delucis, Rafael de Avila},
  title = {Polyurethane Adhesives for Wood Based on a Simple Mixture of Castor Oil and Crude Glycerin},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {23},
  pages = {7251},
  doi = {10.3390/ma16237251}
}
Kostenlos starten →