EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling

Wiem Nasri iD, Zied Driss iD, Ridha Djebali iD, Kyu-Yeon Lee, Hyung-Ho Park iD, Abderazak Bezazi iD, Paulo N B Reis iD

Materials · 19.11.2023 · 16 (22) · 7233

DOI: 10.3390/ma16227233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.11.2023. Verfasst von Wiem Nasri und 6 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax (US), B.P. 1173, Road Soukra km 3.5, …. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: national funds through FCT-Fundação para a Ciência e a Tecnologia, National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The layered fibers of carbon-fiber-reinforced polymer (CFRP) composites exhibit low thermal conductivity (TC) throughout their thickness due to the poor TC of the polymeric resin. Improved heat transmission inside the hydrogen storage tank during the filling process can reduce further compression work, and improved heat insulation can minimize energy loss. Therefore, it is crucial to understand the thermal properties of composites. This paper reports the thermal behavior of plain-woven CFRP composite using simulation at the micro-, meso-, and macro-scales. The TC was predicted numerically and compared to experimental findings and analytical models. Good results were found. Using the approach of multi-scale modeling, a parametric study was carried out to analyze in depth the influence of certain variables on thermal properties. The study revealed that both fiber volume fraction and temperature significantly influenced the TC of the composite, with the interphase fiber/matrix thickness following closely in terms of impact. The matrix porosity was found to have a relatively slighter impact, particularly within the porosity range of 5 to 15%.

Schlagwörter

Stichwörter der Autor:innen

carbon-fiber-reinforced polymermicro-scalemulti-scale modelingthermal conductivitywoven fabric

Autor:innen und Institutionen

  • Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax (US), B.P. 1173, Road Soukra km 3.5, Sfax 3038, Tunisia.
  • UR22ES12: Modeling, Optimization and Augmented Engineering, ISLAI Béja, University of Jendouba, Béja 9000, Tunisia.
  • Department of Materials Science and Engineering, Yonsei University, Seoul 03722, Republic of Korea.
  • Laboratory of Applied Mechanics of New Materials (LMANM), Université 8 Mai 1945-Guelma, B.P. 401, Guelma 24000, Algeria.
  • University of Coimbra, CEMMPRE, ARISE, Department of Mechanical Engineering, 3030-788 Coimbra, Portugal.

ORCID-Profile: Wiem Nasri, Zied Driss, Ridha Djebali, Hyung-Ho Park, Abderazak Bezazi, Paulo N B Reis

Förderung

  • national funds through FCT-Fundação para a Ciência e a Tecnologia
  • National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT)

Zitieren

APA

Nasri, W., Driss, Z., Djebali, R., Lee, K. Y., Park, H. H., Bezazi, A., & Reis, P. N. B. (2023). Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling. Materials, 16(22), 7233. https://doi.org/10.3390/ma16227233

Vancouver

Nasri W, Driss Z, Djebali R, Lee KY, Park HH, Bezazi A, et al. Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling. Materials. 2023;16(22):7233. doi:10.3390/ma16227233

BibTeX
@article{Nasri2023,
  author = {Nasri, Wiem and Driss, Zied and Djebali, Ridha and Lee, Kyu-Yeon and Park, Hyung-Ho and Bezazi, Abderazak and Reis, Paulo N B},
  title = {Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {22},
  pages = {7233},
  doi = {10.3390/ma16227233}
}
Kostenlos starten →