EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Maintaining Excellent Mechanical Properties via Additive Manufacturing of Low-N 25Cr-Type Duplex Stainless Steel

Jianguo He, Jiesheng Lv, Zhigang Song, Changjun Wang, Han Feng, Xiaohan Wu, Yuliang Zhu, Wenjie Zheng

Materials · 10.11.2023 · 16 (22) · 7125

DOI: 10.3390/ma16227125 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.11.2023. Verfasst von Jianguo He und 7 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute of Special Steels, Central Iron & Steel Research Institute Co., Ltd., Beijing 100081, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation Fund of China Steel Research Technology Group Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Duplex stainless steel (DSS) exhibits good mechanical properties and corrosion resistance, and has attracted more and more attention within the fields of both science and technology. However, the increasing levels of N and of Cr, Mo, etc., as alloying elements in DSS increase production difficulty. In particular, the N element increases the risk of Cr2N precipitation, which can seriously deteriorate the thermal plasticity of DSS, while increasing its strength. For this reason, a low-N-content 25Cr-type DSS was designed in order to adapt additive manufacturing processes. With regard to the nano-inclusions of oxide precipitation and effective grain refinement, and considering the benefits of selective laser melting fabrication, a low-N 25Cr-type duplex stainless steel with a 0.09 wt.% N content achieved high mechanical properties, with a yield strength of 712 MPa and an elongation of 27.5%, while the V-notch impact toughness was 160 J/cm2. The microstructure evolution and the reasons behind the improvement in mechanical properties will be discussed in detail.

Schlagwörter

Stichwörter der Autor:innen

duplex stainless steelsmechanical propertiesmicrostructurenano-inclusionselective laser melting

Autor:innen und Institutionen

  • Research Institute of Special Steels, Central Iron & Steel Research Institute Co., Ltd., Beijing 100081, China.

Förderung

  • Innovation Fund of China Steel Research Technology Group Co., Ltd.

Zitieren

APA

He, J., Lv, J., Song, Z., Wang, C., Feng, H., Wu, X., Zhu, Y., & Zheng, W. (2023). Maintaining Excellent Mechanical Properties via Additive Manufacturing of Low-N 25Cr-Type Duplex Stainless Steel. Materials, 16(22), 7125. https://doi.org/10.3390/ma16227125

Vancouver

He J, Lv J, Song Z, Wang C, Feng H, Wu X, et al. Maintaining Excellent Mechanical Properties via Additive Manufacturing of Low-N 25Cr-Type Duplex Stainless Steel. Materials. 2023;16(22):7125. doi:10.3390/ma16227125

BibTeX
@article{He2023,
  author = {He, Jianguo and Lv, Jiesheng and Song, Zhigang and Wang, Changjun and Feng, Han and Wu, Xiaohan and Zhu, Yuliang and Zheng, Wenjie},
  title = {Maintaining Excellent Mechanical Properties via Additive Manufacturing of Low-N 25Cr-Type Duplex Stainless Steel},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {22},
  pages = {7125},
  doi = {10.3390/ma16227125}
}
Kostenlos starten →