Inspection of Spot Welded Joints with the Use of the Ultrasonic Surface Wave
Materials · 03.11.2023 · 16 (21) · 7029
DOI: 10.3390/ma16217029 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.11.2023. Verfasst von Dariusz Ulbrich und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil and Transport Engineering, Poznan University of Technology, 60-965 Poznan, Poland. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Statutory Activities Fund of the Institute of Machines and Motor Vehicles, Poznan University of Technology (PL).
Abstract (Originalsprache)
Spot welded joints play a crucial role in the construction of modern automobiles, serving as a vital method for enhancing the structural integrity, strength, and durability of the vehicle body. Taking into account spot welding process in automotive bodies, numerous defects can arise, such as insufficient weld nugget diameter. It may have evident influence on vehicle operation or even contribute to accidents on the road. Hence, there is a need for non-invasive methods that allow to assess the quality of the spot welds without compromising their structural integrity and characteristics. Thus, this study describes a novel method for assessing spot welded joints using ultrasound technology. The usage of ultrasonic surface waves is the main component of the proposed advancement. The study employed ultrasonic transducers operating at a frequency of 10 MHz and a specially designed setup for testing various spot welded samples. The parameters of the spot welding procedure and the size of the weld nugget caused differences in the ultrasonic surface waveforms that were recorded during experiments. One of the indicators of weld quality was the amplitude of the ultrasonic pulse. For low quality spot welds, the amplitude amounted to around 25% of the maximum value when using single-sided transducers. Conversely, for high-quality welds an amplitude of 90% was achieved. Depending on the size of the weld nugget, a larger or smaller amount of wave energy is transferred, which results in a smaller or larger amplitude of the ultrasonic pulse. Comparable results were obtained when employing transducers on both sides of the tested joint, as an amplitude ranging from 13% for inferior welds to 97% for superior ones was observed. This research confirmed the feasibility of employing surface waves to assess the diameter of the weld nugget accurately.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Civil and Transport Engineering, Poznan University of Technology, 60-965 Poznan, Poland.
- Center for Electromagnetic Fields Engineering and High-Frequency Techniques, Faculty of Electrical Engineering, West Pomeranian University of Technology in Szczecin, 70-313 Szczecin, Poland.
- Faculty of Materials Engineering and Technical Physics, Poznan University of Technology, 61-138 Poznan, Poland.
- Faculty of Mechanical Engineering, Poznan University of Technology, 61-138 Poznan, Poland.
ORCID-Profile: Dariusz Ulbrich, Grzegorz Psuj, Artur Wypych, Dariusz Bartkowski, Aneta Bartkowska, Jakub Kowalczyk
Förderung
- Statutory Activities Fund of the Institute of Machines and Motor Vehicles, Poznan University of Technology (PL)
Zitieren
APA
Ulbrich, D., Psuj, G., Wypych, A., Bartkowski, D., Bartkowska, A., Stachowiak, A., & Kowalczyk, J. (2023). Inspection of Spot Welded Joints with the Use of the Ultrasonic Surface Wave. Materials, 16(21), 7029. https://doi.org/10.3390/ma16217029
Vancouver
Ulbrich D, Psuj G, Wypych A, Bartkowski D, Bartkowska A, Stachowiak A, et al. Inspection of Spot Welded Joints with the Use of the Ultrasonic Surface Wave. Materials. 2023;16(21):7029. doi:10.3390/ma16217029
BibTeX
@article{Ulbrich2023,
author = {Ulbrich, Dariusz and Psuj, Grzegorz and Wypych, Artur and Bartkowski, Dariusz and Bartkowska, Aneta and Stachowiak, Arkadiusz and Kowalczyk, Jakub},
title = {Inspection of Spot Welded Joints with the Use of the Ultrasonic Surface Wave},
journal = {Materials},
year = {2023},
volume = {16},
number = {21},
pages = {7029},
doi = {10.3390/ma16217029}
}
EUVIMED