EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Polyoxymethylene Fiber on the Mechanical Properties and Abrasion Resistance of Ultra-High-Performance Concrete

Lixin Tan, Jun Yang iD, Chuanxi Li, Gaozhan Zhang, Qingjun Ding, Daosheng Sun, Yongyuan Zhang

Materials · 02.11.2023 · 16 (21) · 7014

DOI: 10.3390/ma16217014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.11.2023. Verfasst von Lixin Tan und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Changsha University of Science & Technology, No. 960, SEC. 2, Wanjiali South Road, Yuhua District, Changsha 410114, Chin…. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Outstanding Youth in Colleges and Universities of Anhui Province, Excellent Scientific Research and Innovation Team in Colleges and Universities of Anhui Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is necessary to prepare marine UHPC with synthetic fibers instead of steel fibers, owing to the corrosion risk of steel fibers in marine environments. Currently, the performance of UHPC prepared with different types of fibers has not been comparatively investigated. This work prepared UHPC with steel fiber, polyoxymethylene (POM) fiber, polypropylene (PP) fiber, and polyvinyl alcohol (PVA) fiber. The effects of different fibers on the mechanical properties, impact, and abrasion resistance of UHPC were studied and compared. The results showed that increasing POM fiber can increase the mechanical strength, flexural toughness, impact, and abrasion resistance of UHPC. When its content reaches 2%, the adsorbed-in-fracture energy and abrasion strength of UHPC are 2670 J and 105 h/(kg/m2), respectively. At the same fiber content, POM fiber-reinforced UHPC shows better mechanical strength, toughness, and impact- and abrasion-resistance than the polypropylene (PP)- and polyvinyl alcohol (PVA)-fiber-reinforced UHPCs. Microstructure investigation found that PP fiber has the weakest binding with UHPC paste, which would directly pull out of the matrix under external tensile loading. This weak connection limits the strengthening and toughening effect on the UHPC. PVA fiber has an excellent interfacial connection with the UHPC paste. However, the low tensile strength of PVA fiber limits the strength and toughness of UHPC. POM fiber has a high tensile strength and can absorb tensile loading through debonding, fracture, and tearing. The fracture interface of POM fiber is large, indicating its significant role in strengthening and toughening the UHPC.

Schlagwörter

Stichwörter der Autor:innen

flexural toughnessimpact and abrasion resistancemechanical strengthpolyoxymethylene fiberultra-high-performance concrete

Autor:innen und Institutionen

  • School of Civil Engineering, Changsha University of Science & Technology, No. 960, SEC. 2, Wanjiali South Road, Yuhua District, Changsha 410114, China.
  • Poly Changda Co., Ltd., No. 942, Guangzhou Avenue, Tianhe District, Guangzhou 510640, China.
  • Advanced Building Materials Key Laboratory of Anhui Province, Anhui Jianzhu University, No. 292, Ziyun Road, Shushan District, Hefei 230601, China.
  • School of Materials Science and Engineering, Wuhan University of Technology, No. 122, Luoshi Road, Hongshan District, Wuhan 430070, China.

ORCID-Profile: Jun Yang

Förderung

  • National Natural Science Foundation of China
  • Outstanding Youth in Colleges and Universities of Anhui Province
  • Excellent Scientific Research and Innovation Team in Colleges and Universities of Anhui Province

Zitieren

APA

Tan, L., Yang, J., Li, C., Zhang, G., Ding, Q., Sun, D., & Zhang, Y. (2023). Effect of Polyoxymethylene Fiber on the Mechanical Properties and Abrasion Resistance of Ultra-High-Performance Concrete. Materials, 16(21), 7014. https://doi.org/10.3390/ma16217014

Vancouver

Tan L, Yang J, Li C, Zhang G, Ding Q, Sun D, et al. Effect of Polyoxymethylene Fiber on the Mechanical Properties and Abrasion Resistance of Ultra-High-Performance Concrete. Materials. 2023;16(21):7014. doi:10.3390/ma16217014

BibTeX
@article{Tan2023,
  author = {Tan, Lixin and Yang, Jun and Li, Chuanxi and Zhang, Gaozhan and Ding, Qingjun and Sun, Daosheng and Zhang, Yongyuan},
  title = {Effect of Polyoxymethylene Fiber on the Mechanical Properties and Abrasion Resistance of Ultra-High-Performance Concrete},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {21},
  pages = {7014},
  doi = {10.3390/ma16217014}
}
Kostenlos starten →