Surface Roughness-Induced Changes in Important Physical Features of CoFeSm Thin Films on Glass Substrates during Annealing
Materials · 31.10.2023 · 16 (21) · 6989
DOI: 10.3390/ma16216989 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2023. Verfasst von Chi-Lon Fern und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Chung Hsing University, Taichung 40227, Taiwan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Council, National Yunlin University of Science and Technology.
Abstract (Originalsprache)
Co60Fe20Sm20 thin films were deposited onto glass substrates in a high vacuum setting. The films varied in thickness from 10 to 50 nm and underwent annealing processes at different temperatures: room temperature (RT), 100, 200, and 300 °C. Our analysis encompassed structural, magnetic, electrical, nanomechanical, adhesive, and optical properties in relation to film thickness and annealing temperature. X-ray diffraction (XRD) analysis did not reveal characteristic peaks in Co60Fe20Sm20 thin films due to insufficient growth-driving forces. Electrical measurements indicated reduced resistivity and sheet resistance with increasing film thickness and higher annealing temperatures, owing to hindered current-carrier transport resulting from the amorphous structure. Atomic force microscope (AFM) analysis showed a decrease in surface roughness with increased thickness and annealing temperature. The low-frequency alternating current magnetic susceptibility (χac) values increased with film thickness and annealing temperature. Nanoindentation analysis demonstrated reduced film hardness and Young’s modulus with thicker films. Contact angle measurements suggested a hydrophilic film. Surface energy increased with greater film thickness, particularly in annealed films, indicating a decrease in contact angle contributing to this increase. Transmittance measurements have revealed intensified absorption and reduced transmittance with thicker films. In summary, the surface roughness of CoFeSm films at different annealing temperatures significantly influenced their magnetic, electrical, adhesive, and optical properties. A smoother surface reduced the pinning effect on the domain walls, enhancing the χac value. Additionally, diminished surface roughness led to a lower contact angle and higher surface energy. Additionally, smoother surfaces exhibited higher carrier conductivity, resulting in reduced electrical resistance. The optical transparency decreased due to the smoother surface of Co60Fe20Sm20 films.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, National Chung Hsing University, Taichung 40227, Taiwan.
- Department of Materials Science and Engineering, I-Shou University, Kaohsiung 84001, Taiwan.
- Bachelor Program in Industrial Technology, National Yunlin University of Science and Technology, 123 University Road, Section 3, Yunlin, Douliou 64002, Taiwan.
- Department of Mechanical Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 80778, Taiwan.
- Graduate School of Materials Science, National Yunlin University of Science and Technology, 123 University Road, Section 3, Yunlin, Douliou 64002, Taiwan.
- Department of Electronic Engineering, National Yunlin University of Science and Technology, 123 University Road, Section 3, Yunlin, Douliou 64002, Taiwan.
ORCID-Profile: Chia-Chin Chiang, Yuan-Tsung Chen, Shih-Hung Lin
Förderung
- National Science Council
- National Yunlin University of Science and Technology
Zitieren
APA
Fern, C. L., Liu, W. J., Chang, Y. H., Chiang, C. C., Chen, Y. T., Lu, P. X., Su, X. M., Lin, S. H., & Lin, K. W. (2023). Surface Roughness-Induced Changes in Important Physical Features of CoFeSm Thin Films on Glass Substrates during Annealing. Materials, 16(21), 6989. https://doi.org/10.3390/ma16216989
Vancouver
Fern CL, Liu WJ, Chang YH, Chiang CC, Chen YT, Lu PX, et al. Surface Roughness-Induced Changes in Important Physical Features of CoFeSm Thin Films on Glass Substrates during Annealing. Materials. 2023;16(21):6989. doi:10.3390/ma16216989
BibTeX
@article{Fern2023,
author = {Fern, Chi-Lon and Liu, Wen-Jen and Chang, Yung-Huang and Chiang, Chia-Chin and Chen, Yuan-Tsung and Lu, Pei-Xin and Su, Xuan-Ming and Lin, Shih-Hung and Lin, Ko-Wei},
title = {Surface Roughness-Induced Changes in Important Physical Features of CoFeSm Thin Films on Glass Substrates during Annealing},
journal = {Materials},
year = {2023},
volume = {16},
number = {21},
pages = {6989},
doi = {10.3390/ma16216989}
}
EUVIMED