Compatibility of Sustainable Mater-Bi/poly(ε-caprolactone)/cellulose Biocomposites as a Function of Filler Modification
Materials · 23.10.2023 · 16 (20) · 6814
DOI: 10.3390/ma16206814 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.10.2023. Verfasst von Aleksander Hejna und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Technology, Poznan University of Technology, Piotrowo 3, 61-138 Poznań, Poland. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center, Ministry of Science and Higher Education, National Science Centre.
Abstract (Originalsprache)
Despite their popularity and multiplicity of applications, wood–polymer composites (WPCs) still have to overcome particular issues related to their processing and properties. The main aspect is the compatibility with plant-based materials which affects the overall performance of the material. It can be enhanced by strengthening the interfacial adhesion resulting from physical and/or chemical interactions between the matrix and filler, which requires introducing a compatibilizer or a proper modification of one or both phases. Herein, the impact of cellulose filler modifications with varying contents (1–10 wt%) of hexamethylene diisocyanate (HDI) on the compatibility of Mater-Bi/poly(ε-caprolactone) (PCL)-based biocomposites was evaluated. An analysis of surface wettability revealed that the filler modification reduced the hydrophilicity gap between phases, suggesting compatibility enhancement. It was later confirmed via microscopic observation (scanning electron microscopy (SEM) and atomic force microscopy (AFM)), which pointed to the finer dispersion of modified particles and enhanced quality of the interface. The rheological analysis confirmed increased system homogeneity by the reduction in complex viscosity. In contrast, thermogravimetric analysis (TGA) indicated the efficient modification of filler and the presence of the chemical interactions at the interface by the shift of thermal decomposition onset and the changes in the degradation course.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Technology, Poznan University of Technology, Piotrowo 3, 61-138 Poznań, Poland.
- Department of Polymer Technology, Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland.
- Institute of Materials Engineering, Poznan University of Technology, Piotrowo 3, 61-138 Poznań, Poland.
- Group 'Materials + Technologies' (GMT), Department of Chemical and Environmental Engineering, Faculty of Engineering Gipuzkoa, University of the Basque Country (UPV/EHU), Plaza Europa 1, 20018 Donostia-San Sebastian, Sp…
ORCID-Profile: Aleksander Hejna, Mateusz Barczewski, Olga Mysiukiewicz, Adam Piasecki
Förderung
- National Science Center
- Ministry of Science and Higher Education
- National Science Centre
Zitieren
APA
Hejna, A., Barczewski, M., Kosmela, P., Mysiukiewicz, O., Piasecki, A., & Tercjak, A. (2023). Compatibility of Sustainable Mater-Bi/poly(ε-caprolactone)/cellulose Biocomposites as a Function of Filler Modification. Materials, 16(20), 6814. https://doi.org/10.3390/ma16206814
Vancouver
Hejna A, Barczewski M, Kosmela P, Mysiukiewicz O, Piasecki A, Tercjak A. Compatibility of Sustainable Mater-Bi/poly(ε-caprolactone)/cellulose Biocomposites as a Function of Filler Modification. Materials. 2023;16(20):6814. doi:10.3390/ma16206814
BibTeX
@article{Hejna2023,
author = {Hejna, Aleksander and Barczewski, Mateusz and Kosmela, Paulina and Mysiukiewicz, Olga and Piasecki, Adam and Tercjak, Agnieszka},
title = {Compatibility of Sustainable Mater-Bi/poly(ε-caprolactone)/cellulose Biocomposites as a Function of Filler Modification},
journal = {Materials},
year = {2023},
volume = {16},
number = {20},
pages = {6814},
doi = {10.3390/ma16206814}
}
EUVIMED