Research on Multiscale Modeling and Experiment of CFRP Milling
Materials · 18.10.2023 · 16 (20) · 6748
DOI: 10.3390/ma16206748 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.10.2023. Verfasst von Jing Ni und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Key R&D Plan Projects in Zhejiang Province, Zhejiang Province Public Welfare Technology Application Research Project, Key R&D Plan Projects in Zhejiang Province.
Abstract (Originalsprache)
High-quality milling of carbon fiber reinforced polymer (CFRP) composites is of great importance for the high-performance manufacturing of structures made of this hard-to-machine material. In this paper, a multiscale finite element (FE) model, considering the thermal–mechanical coupling effect, was developed to simulate the milling process and reveal its material removal mechanism. The corresponding milling experiments were conducted to validate the simulated cutting forces and temperature, which were in good agreement with the experiment results. In the macroscale model, the Hashin failure criteria were used to estimate the failure of the composites. In the microscale model, the fibers, matrix, and the fiber–matrix interface were modeled separately, to investigate the mechanisms of material removal behavior during milling, among fiber breakage, matrix cracking, and fiber–matrix debonding. Based on the macroscale numerical and experimental results, the higher cutting speed was demonstrated to improve the surface quality of CFRP milling. According to the results from the microscale model, the material removal mechanism varies depending on the orientation of the fibers and can be divided into four stages. The outcome of this work provides guidelines to further investigate optimal manufacturing parameters for the milling of CFRP composites and their cutting mechanisms.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China.
- School of Mechanical and Automotive Engineering, Zhejiang University of Water Resources and Electric Power, Hangzhou 310018, China.
ORCID-Profile: Jing Ni, Aihua Meng
Förderung
- the Key R&D Plan Projects in Zhejiang Province
- Zhejiang Province Public Welfare Technology Application Research Project
- Key R&D Plan Projects in Zhejiang Province
Zitieren
APA
Ni, J., Liu, H., Hong, Z., Meng, A., & Li, M. (2023). Research on Multiscale Modeling and Experiment of CFRP Milling. Materials, 16(20), 6748. https://doi.org/10.3390/ma16206748
Vancouver
Ni J, Liu H, Hong Z, Meng A, Li M. Research on Multiscale Modeling and Experiment of CFRP Milling. Materials. 2023;16(20):6748. doi:10.3390/ma16206748
BibTeX
@article{Ni2023,
author = {Ni, Jing and Liu, Haishan and Hong, Zhi and Meng, Aihua and Li, Mingfan},
title = {Research on Multiscale Modeling and Experiment of CFRP Milling},
journal = {Materials},
year = {2023},
volume = {16},
number = {20},
pages = {6748},
doi = {10.3390/ma16206748}
}
EUVIMED