CO2 Physisorption over an Industrial Molecular Sieve Zeolite: An Experimental and Theoretical Approach
Materials · 11.10.2023 · 16 (20) · 6656
DOI: 10.3390/ma16206656 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.10.2023. Verfasst von Anastasios I Tsiotsias und 3 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Alternative Fuels and Environmental Catalysis (LAFEC), Department of Chemical Engineering, University of Western Macedonia, GR-50100 Ko…. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Competitiveness, Entrepreneurship and Innovation, Hellenic Foundation for Research and Innovation.
Abstract (Originalsprache)
The present work studies the adsorption of CO2 using a zeolitic industrial molecular sieve (IMS) with a high surface area. The effect of the CO2 feed concentration and the adsorption temperature in conjunction with multiple adsorption–desorption cycles was experimentally investigated. To assess the validity of the experimental results, theoretical calculations based on well-established equations were employed and the values of equilibrium, kinetic, and thermodynamic parameters are presented. Three additional column kinetic models were applied to the data obtained experimentally, in order to predict the breakthrough curves and thus facilitate process design. Results showed a negative correlation between temperature and adsorption capacity, indicating that physical adsorption takes place. Theoretical calculations revealed that the Langmuir isotherm, the Bangham kinetic model (i.e., pore diffusion is the rate-determining step), and the Thomas and Yoon–Nelson models were suitable to describe the CO2 adsorption process by the IMS. The IMS adsorbent material maintained its high CO2 adsorption capacity (>200 mg g−1) after multiple adsorption–desorption cycles, showing excellent regenerability and requiring only a mild desorption treatment (200 °C for 15 min) for regeneration.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Alternative Fuels and Environmental Catalysis (LAFEC), Department of Chemical Engineering, University of Western Macedonia, GR-50100 Kozani, Greece.
ORCID-Profile: Anastasios I Tsiotsias, Amvrosios G Georgiadis, Nikolaos D Charisiou, Maria A Goula
Förderung
- Competitiveness, Entrepreneurship and Innovation
- Hellenic Foundation for Research and Innovation
Zitieren
APA
Tsiotsias, A. I., Georgiadis, A. G., Charisiou, N. D., & Goula, M. A. (2023). CO2 Physisorption over an Industrial Molecular Sieve Zeolite: An Experimental and Theoretical Approach. Materials, 16(20), 6656. https://doi.org/10.3390/ma16206656
Vancouver
Tsiotsias AI, Georgiadis AG, Charisiou ND, Goula MA. CO2 Physisorption over an Industrial Molecular Sieve Zeolite: An Experimental and Theoretical Approach. Materials. 2023;16(20):6656. doi:10.3390/ma16206656
BibTeX
@article{Tsiotsias2023,
author = {Tsiotsias, Anastasios I and Georgiadis, Amvrosios G and Charisiou, Nikolaos D and Goula, Maria A},
title = {CO2 Physisorption over an Industrial Molecular Sieve Zeolite: An Experimental and Theoretical Approach},
journal = {Materials},
year = {2023},
volume = {16},
number = {20},
pages = {6656},
doi = {10.3390/ma16206656}
}
EUVIMED