EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron–Carbide Material

Seth Iwan, Wesley Sutton, Paul A Baker iD, Raimundas Sereika iD, Yogesh K Vohra iD

Materials · 01.10.2023 · 16 (19) · 6526

DOI: 10.3390/ma16196526 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.10.2023. Verfasst von Seth Iwan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, University of Alabama at Birmingham, Birmingham, AL 35294, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Nuclear Security Administration, National Science Foundation (NSF)—Research Experiences for Undergraduates (REU)-site award to UAB, NSF Major Research Instrumentation program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A boron-rich boron–carbide material (B4+δC) was synthesized by spark plasma sintering of a ball-milled mixture of high-purity boron powder and graphitic carbon at a pressure of 7 MPa and a temperature of 1930 °C. This high-pressure, high-temperature synthesized material was recovered and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, Vickers hardness measurements, and thermal oxidation studies. The X-ray diffraction studies revealed a single-phase rhombohedral structure (space group R-3m) with lattice parameters in hexagonal representation as a = 5.609 ± 0.007 Å and c = 12.082 ± 0.02 Å. The experimental lattice parameters result in a value of δ = 0.55, or the composition of the synthesized compound as B4.55C. The high-resolution scans of boron binding energy reveal the existence of a B-C bond at 188.5 eV. Raman spectroscopy reveals the existence of a 386 cm−1 vibrational mode representative of C-B-B linear chain formation due to excess boron in the lattice. The measured Vickers microhardness at a load of 200 gf shows a high hardness value of 33.8 ± 2.3 GPa. Thermal gravimetric studies on B4.55C were conducted at a temperature of 1300 °C in a compressed dry air environment, and its behavior is compared to other high-temperature ceramic materials such as high-entropy transition metal boride. The high neutron absorption cross section, high melting point, high mechanical strength, and thermal oxidation resistance make this material ideal for applications in extreme environments.

Schlagwörter

Stichwörter der Autor:innen

Raman spectroscopyboron–carbon systemextreme environmentsmechanical propertiesthermal oxidation

Autor:innen und Institutionen

  • Department of Physics, University of Alabama at Birmingham, Birmingham, AL 35294, USA.
  • Department of Chemistry, Physics, and Astronomy, Georgia College and State University, Milledgeville, GA 31061, USA.

ORCID-Profile: Paul A Baker, Raimundas Sereika, Yogesh K Vohra

Förderung

  • National Nuclear Security Administration
  • National Science Foundation (NSF)—Research Experiences for Undergraduates (REU)-site award to UAB
  • NSF Major Research Instrumentation program

Zitieren

APA

Iwan, S., Sutton, W., Baker, P. A., Sereika, R., & Vohra, Y. K. (2023). Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron–Carbide Material. Materials, 16(19), 6526. https://doi.org/10.3390/ma16196526

Vancouver

Iwan S, Sutton W, Baker PA, Sereika R, Vohra YK. Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron–Carbide Material. Materials. 2023;16(19):6526. doi:10.3390/ma16196526

BibTeX
@article{Iwan2023,
  author = {Iwan, Seth and Sutton, Wesley and Baker, Paul A and Sereika, Raimundas and Vohra, Yogesh K},
  title = {Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron–Carbide Material},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {19},
  pages = {6526},
  doi = {10.3390/ma16196526}
}
Kostenlos starten →