The Recovery of Vanadium Pentoxide (V2O5) from Spent Catalyst Utilized in a Sulfuric Acid Production Plant in Jordan
Materials · 30.09.2023 · 16 (19) · 6503
DOI: 10.3390/ma16196503 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.09.2023. Verfasst von Hiba H Al Amayreh und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Scientific Basic Sciences, Faculty of Engineering Technology, Al-Balqa Applied University, Amman 11134, Jordan. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The University of Jordan (UJ).
Abstract (Originalsprache)
Vanadium is a significant metal, and its derivatives are widely employed in industry. One of the essential vanadium compounds is vanadium pentoxide (V2O5), which is mostly recovered from titanomagnetite, uranium–vanadium deposits, phosphate rocks, and spent catalysts. A smart method for the characterization and recovery of vanadium pentoxide (V2O5) was investigated and implemented as a small-scale benchtop model. Several nondestructive analytical techniques, such as particle size analysis, X-ray fluorescence (XRF), inductively coupled plasma (ICP), and X-ray diffraction (XRD) were used to determine the physical and chemical properties, such as the particle size and composition, of the samples before and after the recovery process of vanadium pentoxide (V2O5). After sample preparation, several acid and alkali leaching techniques were investigated. A noncorrosive, environmentally friendly extraction method based on the use of less harmful acids was applied in batch and column experiments for the extraction of V2O5 as vanadium ions from a spent vanadium catalyst. In batching experiments, different acids and bases were examined as leaching solution agents; oxalic acid showed the best percent recovery for vanadium ions compared with the other acids used. The effects of the contact time, acid concentration, solid-to-liquid ratio, stirring rate, and temperature were studied to optimize the leaching conditions. Oxalic acid with a 6% (w/w) to a 1/10 solid-to-liquid ratio at 300 rpm and 50 °C was the optimal condition for extraction (67.43% recovery). On the other hand, the column experiment with a 150 cm long and 5 cm i.d. and 144 h contact time using the same leaching reagent, 6% oxalic acid, showed a 94.42% recovery. The results of the present work indicate the possibility of the recovery of vanadium pentoxide from the spent vanadium catalyst used in the sulfuric acid industry in Jordan.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Scientific Basic Sciences, Faculty of Engineering Technology, Al-Balqa Applied University, Amman 11134, Jordan.
- Department of Basic Sciences, Faculty of Arts and Sciences, Al-Ahliyya Amman University, Amman 19328, Jordan.
- Jordan Atomic Energy Commission, Amman 11934, Jordan.
- Chemistry Department, School of Science, The University of Jordan, Amman 11942, Jordan.
- Hamdi Mango Center for Scientific Research, The University of Jordan, Amman 11942, Jordan.
ORCID-Profile: Hiba H Al Amayreh, Mohammed K Hourani, Abeer Al Bawab
Förderung
- The University of Jordan (UJ)
Zitieren
APA
Al Amayreh, H. H., Khalaf, A., Hawwari, M. I., Hourani, M. K., & Al Bawab, A. (2023). The Recovery of Vanadium Pentoxide (V2O5) from Spent Catalyst Utilized in a Sulfuric Acid Production Plant in Jordan. Materials, 16(19), 6503. https://doi.org/10.3390/ma16196503
Vancouver
Al Amayreh HH, Khalaf A, Hawwari MI, Hourani MK, Al Bawab A. The Recovery of Vanadium Pentoxide (V2O5) from Spent Catalyst Utilized in a Sulfuric Acid Production Plant in Jordan. Materials. 2023;16(19):6503. doi:10.3390/ma16196503
BibTeX
@article{AlAmayreh2023,
author = {Al Amayreh, Hiba H and Khalaf, Aya and Hawwari, Majd I and Hourani, Mohammed K and Al Bawab, Abeer},
title = {The Recovery of Vanadium Pentoxide (V2O5) from Spent Catalyst Utilized in a Sulfuric Acid Production Plant in Jordan},
journal = {Materials},
year = {2023},
volume = {16},
number = {19},
pages = {6503},
doi = {10.3390/ma16196503}
}
EUVIMED