EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Study on Micro-Grinding Performance of 2.5D Cf/SiCs, 2.5D SiCf/SiCs, and SiC Ceramics

Quan Wen, Yuanfeng Li, Yadong Gong

Materials · 23.09.2023 · 16 (19) · 6369

DOI: 10.3390/ma16196369 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.09.2023. Verfasst von Quan Wen und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the micro-grinding process and performance of 2.5D Cf/SiC composites and 2.5D SiCf/SiC composites in depth, single-factor micro-grinding experiments were conducted by using SiC ceramics as a comparison. Differences in the material removal process, surface microstructure, surface roughness, and grinding force of the three materials under the same grinding parameters were comparatively analyzed. The results indicate that crack propagation is severe during the micro-grinding process of SiC ceramics. The ground surface is uneven, accompanied by pit defects and large surface roughness Ra. However, the presence of reinforcing fibers and interfaces in the two types of composites can inhibit crack propagation or change their extension directions. Therefore, their surfaces are smooth and flat after grinding, with small defects and low surface roughness Ra. In addition, the grinding processes of the two composites are both related to fiber orientation. There are differences in crack propagation paths and fiber fracture positions in the weft fiber layer and the radial fiber layer, which result in different forms of grinding defects. During micro-grinding, the real-time force signals of 2.5D Cf/SiC composites and 2.5D SiCf/SiC composites are relatively stable, while the signals of SiC ceramics have a large number of spikes. The average micro-grinding force of the three materials is: SiC ceramics > 2.5D SiCf/SiC composites > 2.5D Cf/SiC composites.

Schlagwörter

Stichwörter der Autor:innen

2.5D Cf/SiC composites2.5D SiCf/SiC compositesSiC ceramicsgrinding forcemicro-grindingsurface micro-topographysurface roughness

Autor:innen und Institutionen

  • School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110819, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wen, Q., Li, Y., & Gong, Y. (2023). Comparative Study on Micro-Grinding Performance of 2.5D Cf/SiCs, 2.5D SiCf/SiCs, and SiC Ceramics. Materials, 16(19), 6369. https://doi.org/10.3390/ma16196369

Vancouver

Wen Q, Li Y, Gong Y. Comparative Study on Micro-Grinding Performance of 2.5D Cf/SiCs, 2.5D SiCf/SiCs, and SiC Ceramics. Materials. 2023;16(19):6369. doi:10.3390/ma16196369

BibTeX
@article{Wen2023,
  author = {Wen, Quan and Li, Yuanfeng and Gong, Yadong},
  title = {Comparative Study on Micro-Grinding Performance of 2.5D Cf/SiCs, 2.5D SiCf/SiCs, and SiC Ceramics},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {19},
  pages = {6369},
  doi = {10.3390/ma16196369}
}
Kostenlos starten →