EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rosen-Type Piezoelectric Transformers Based on 0.5Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 Ceramic and Doped with Sb2O3

Suk-Young Jung iD, Gwangseop Lee iD, Tae-Wan Kim, Sung-Jin Kim, Jung-Hyuk Koh

Materials · 14.09.2023 · 16 (18) · 6201

DOI: 10.3390/ma16186201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.09.2023. Verfasst von Suk-Young Jung und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical and Electronic Engineering, Chung-Ang University, Seoul 06974, Republic of Korea. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning, Korea Institute for Advancement of Technology, Korea government Ministry of Trade, Industry and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the characteristics in the lead-free piezoelectric ceramic 0.5Ba(Zr0.2Ti0.8)O3−0.5(Ba0.7Ca0.3)TiO3 (0.5BZT–0.5BCT) were investigated to assess its potential for Rosen-type piezoelectric transformers. This piezoelectric ceramic has a piezoelectric charge coefficient d33 of 430 pC/N, an electromechanical coupling factor kp of 49%, a dielectric constant εr of 2836, a remnant polarization Pr of 4.98 μC/cm2, and a coercive electric field Ec of 2.41 kV/cm. Sb2O3 was soft doped with 0.05, 0.1, 0.15, and 0.2 mol%, respectively, and exhibited excellent physical properties at 0.1 mol%. Based on this, a piezoelectric transformer was fabricated and measured, and it showed better output characteristics than pure 0.5BZT–0.5BCT. The amplification ratio (Vout/Vin) was optimized based on the device geometry and properties of the piezoelectric material. Moreover, the output characteristics of the Rosen−type piezoelectric transformer were simulated with the PSpice program. Output values of the fabricated and simulated piezoelectric transformers for the r vibrational frequency were compared and analyzed. Accordingly, the step-up amplification ratios Vout/Vin of the fabricated and simulated devices at the vibrational frequency were compared as well. This piezoelectric transformer could replace silicon steel transformers and be used for the creation of black light and for laptop chargers.

Schlagwörter

Stichwörter der Autor:innen

0.5Ba(Zr0.2Ti0.8)O3−0.5(Ba0.7Ca0.3)TiO3Rosen-typepiezoelectric transformerssoft-doped Sb2O3step-up amplification ratio

Autor:innen und Institutionen

  • School of Electrical and Electronic Engineering, Chung-Ang University, Seoul 06974, Republic of Korea.
  • Department of Intelligent Energy and Industry, Chung-Ang University, Seoul 06974, Republic of Korea.
  • College of Electrical and Computer Engineering, Chungbuk National University, Cheongju 28644, Republic of Korea.

ORCID-Profile: Suk-Young Jung, Gwangseop Lee

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning
  • Korea Institute for Advancement of Technology
  • Korea government Ministry of Trade, Industry and Energy
  • MOTIE (Ministry of Trade, Industry and Energy) in Korea

Zitieren

APA

Jung, S. Y., Lee, G., Kim, T. W., Kim, S. J., & Koh, J. H. (2023). Rosen-Type Piezoelectric Transformers Based on 0.5Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 Ceramic and Doped with Sb2O3. Materials, 16(18), 6201. https://doi.org/10.3390/ma16186201

Vancouver

Jung SY, Lee G, Kim TW, Kim SJ, Koh JH. Rosen-Type Piezoelectric Transformers Based on 0.5Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 Ceramic and Doped with Sb2O3. Materials. 2023;16(18):6201. doi:10.3390/ma16186201

BibTeX
@article{Jung2023,
  author = {Jung, Suk-Young and Lee, Gwangseop and Kim, Tae-Wan and Kim, Sung-Jin and Koh, Jung-Hyuk},
  title = {Rosen-Type Piezoelectric Transformers Based on 0.5Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 Ceramic and Doped with Sb2O3},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {18},
  pages = {6201},
  doi = {10.3390/ma16186201}
}
Kostenlos starten →