EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Yunfei Wang, Wenyao Chen, Ya Liu iD, Haoping Peng, Jianhua Wang iD, Xuping Su

Materials · 13.09.2023 · 16 (18) · 6188

DOI: 10.3390/ma16186188 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.09.2023. Verfasst von Yunfei Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Postgraduate Research and Practice Innovation Program of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The synergistic effect between strontium (Sr) and melt quenching on the solidified microstructure of hypereutectic Al-Si alloys was investigated by optical and scanning electron microscopy. The results indicate that melt quenching can suppress the growth of primary Si particles in the solidified structure of the hypereutectic Al-Si alloy, resulting in a significant decrease of in the average size of primary Si particles in Al-(18~22)Si alloys from 30.35~66.31 μm to 15.13~34.63 μm. The synergistic effect between Sr and melt quenching can further inhibit the precipitation of primary Si particles in the Al-18Si alloy. After the addition of Sr to Al-18Si alloy and undergoing melt quenching, the area fraction of primary Si clearly decreases. When the added amount of Sr increases from 0.1 wt.% to 0.5 wt.%, the area fraction of primary Si decreases from 1.13% to 0.16%. With 0.5 wt.% Sr in the tested alloy, the inhibiting effect on primary Si precipitation was significantly improved. Research has shown that the cooling rate has a significant impact on the solidified structure of the melt-quenched Al-18Si-0.5Sr alloy. There exists no primary Si in solidified structures on the area of 1/8R and 1/4R from the surface of the round bar sample, but the area fraction of primary Si increases, respectively, to 1.97% and 12.48% on the area of 1/2R and R from the surface. The higher the cooling rate, the higher the inhibitory effect on the primary Si precipitation in the Al-18Si-0.5Sr alloy.

Schlagwörter

Stichwörter der Autor:innen

hypereutectic Al-Si alloymelt quenchingsolidified microstructurestrontiumsynergistic effect

Autor:innen und Institutionen

  • Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, China.
  • Jiangsu Collaborative Innovation Center of Photovoltaic Science and Engineering, Changzhou University, Changzhou 213164, China.

ORCID-Profile: Ya Liu, Jianhua Wang

Förderung

  • National Natural Science Foundation of China
  • Postgraduate Research and Practice Innovation Program of Jiangsu Province

Zitieren

APA

Wang, Y., Chen, W., Liu, Y., Peng, H., Wang, J., & Su, X. (2023). Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys. Materials, 16(18), 6188. https://doi.org/10.3390/ma16186188

Vancouver

Wang Y, Chen W, Liu Y, Peng H, Wang J, Su X. Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys. Materials. 2023;16(18):6188. doi:10.3390/ma16186188

BibTeX
@article{Wang2023,
  author = {Wang, Yunfei and Chen, Wenyao and Liu, Ya and Peng, Haoping and Wang, Jianhua and Su, Xuping},
  title = {Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {18},
  pages = {6188},
  doi = {10.3390/ma16186188}
}
Kostenlos starten →