EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Time

Jakub Franke, Tomáš Koutecký iD, Daniel Koutný iD

Materials · 11.09.2023 · 16 (18) · 6165

DOI: 10.3390/ma16186165 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.09.2023. Verfasst von Jakub Franke und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Machine and Industrial Design, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Re…. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education Youth and Sports, Faculty of Mechanical Engineering, Brno University of Technology, Ministry of Education, Youth and Sports.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study compared eight sublimation scanning sprays in terms of their effect on 3D scanning results, coating thickness, and sublimation time. The work used an automated spraying system to ensure the same deposition conditions for all tested materials. All experiments were performed under the same environmental conditions to exclude the influence of the ambient environment on the coatings. All tested scanning sprays created coatings with thicknesses in the order of tens of micrometers that were detectable by the 3D scanner Atos III Triple Scan. The coatings must be applied carefully when accurate measurements are required. All used materials enabled the capture of the highly reflective surface of the Si-wafer. However, the differences between some sprays were significant. Sublimation time measurements showed that all coatings disappeared from the Si-wafer surface completely. Nevertheless, all coatings left visible traces on the mirror-like surface. They were easily wiped off with a cloth.

Schlagwörter

Stichwörter der Autor:innen

coating thicknessmatte coatingoptical 3D scanningscanning spraysublimation coating

Autor:innen und Institutionen

  • Institute of Machine and Industrial Design, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic.

ORCID-Profile: Tomáš Koutecký, Daniel Koutný

Förderung

  • Ministry of Education Youth and Sports
  • Faculty of Mechanical Engineering, Brno University of Technology
  • Ministry of Education, Youth and Sports
  • Brno University of Technology

Zitieren

APA

Franke, J., Koutecký, T., & Koutný, D. (2023). Comparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Time. Materials, 16(18), 6165. https://doi.org/10.3390/ma16186165

Vancouver

Franke J, Koutecký T, Koutný D. Comparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Time. Materials. 2023;16(18):6165. doi:10.3390/ma16186165

BibTeX
@article{Franke2023,
  author = {Franke, Jakub and Koutecký, Tomáš and Koutný, Daniel},
  title = {Comparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Time},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {18},
  pages = {6165},
  doi = {10.3390/ma16186165}
}
Kostenlos starten →