Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve
Materials · 11.09.2023 · 16 (18) · 6162
DOI: 10.3390/ma16186162 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.09.2023. Verfasst von Mingze Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment, Dalian University of Technology, Dalian 116024, …. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the 111 Project, the Fundamental Research Funds for the Central Universities of China.
Abstract (Originalsprache)
This paper presents a new analytical model of a conical bridge-type displacement amplification mechanism (DAM) considering the effect of external loads and a piezostack actuator (PSA). With the merits of simple implementation and better fitting, the non-uniform rational B-spline (NURBS) is employed to parameterize conical connecting beams of the DAM, and an analytical model of the displacement amplification ratio and input stiffness is established based on Castigliano’s second theorem. After that, considering the interactions with elastic loads and PSA, the actual displacement amplification ratio of the conical DAM is obtained, and the effect of the shape of connecting beams in the performance of the DAM is further analyzed. The proposed analytical model is verified by finite element analysis (FEA), and the results show a maximum error of 6.31% between the calculated value and FEA results, demonstrating the accuracy of the proposed model. A prototype of the conical DAM with optimized shape is fabricated and experimentally tested, which further validates the effectiveness and accuracy of the proposed analytical model. The proposed model offers a new method for analysis and shape optimization of the bridge-type DAM under specific elastic loads.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment, Dalian University of Technology, Dalian 116024, China.
ORCID-Profile: Mingze Wang
Förderung
- the National Natural Science Foundation of China
- the 111 Project
- the Fundamental Research Funds for the Central Universities of China
- National Natural Science Foundation of China
- 111 Project
- Fundamental Research Funds for the Central Universities of China
Zitieren
APA
Wang, M., Zhang, C., Liu, S., & Wang, X. (2023). Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve. Materials, 16(18), 6162. https://doi.org/10.3390/ma16186162
Vancouver
Wang M, Zhang C, Liu S, Wang X. Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve. Materials. 2023;16(18):6162. doi:10.3390/ma16186162
BibTeX
@article{Wang2023,
author = {Wang, Mingze and Zhang, Cheng and Liu, Shutian and Wang, Xiaoli},
title = {Modeling and Analysis of a Conical Bridge-Type Displacement Amplification Mechanism Using the Non-Uniform Rational B-Spline Curve},
journal = {Materials},
year = {2023},
volume = {16},
number = {18},
pages = {6162},
doi = {10.3390/ma16186162}
}
EUVIMED