Residual Properties of Geopolymer Concrete for Post-Fire Evaluation of Structures
Materials · 04.09.2023 · 16 (17) · 6065
DOI: 10.3390/ma16176065 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.09.2023. Verfasst von Balamurali Kanagaraj und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Karunya Institute of Technology and Sciences, Coimbatore 641114, India. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The research focuses on effectively utilizing industrial by-products, namely fly ash (FA) and ground granulated blast furnace slag (GGBS), to develop sustainable construction materials that can help reduce carbon emissions in the construction industry. Geopolymer mix design using these by-products is identified as a potential solution. The study investigates the impact of different water to binder ratios (W/B) ranging from 0.4 to 0.6 on the residual properties, including compressive strength (CS), of geopolymer concrete (GPC), in accordance with Indian Standard for Alkali activated concrete. Lower W/B ratios were found to result in a more compact and less porous microstructure in the GPC. Additionally, the research explores the post-fire performance of GPC with varying grades (M10, M20, M30, & M40) and different W/B ratios, following the ISO 834 standard fire curve. It was observed that concrete samples exposed to elevated temperatures displayed a more porous microstructure. The mass loss of GPC with 0.4 W/B was found to be 2.3–5.9% and for 0.6 W/B ratio, the loss was found to be 3–6.5%, after exposing to 30-, 60-, 90-, and 120-min of heating. In the case of strength loss, for 0.4 W/B ratio, the loss was 36.81–77.09%, and for 0.6 W/B ratio the loss was 38.3–100%, after exposing to 30-, 60-, 90-, and 120-min of heating. Overall, the findings suggest that optimizing the W/B ratio in geopolymer concrete can enhance its compressive strength, as well as residual properties, and contribute to its suitability as a sustainable construction material. However, the response to elevated temperatures should also be considered to ensure its performance in fire scenarios.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Civil Engineering, Karunya Institute of Technology and Sciences, Coimbatore 641114, India.
- Department of Electronics and Communication Engineering, Karunya Institute of Technology and Sciences, Coimbatore 641114, India.
- Department of Civil and Environmental Engineering, Michigan State University, East Lansing, MI 48824, USA.
ORCID-Profile: Balamurali Kanagaraj, Diana Andrushia
Zitieren
APA
Kanagaraj, B., Anand, N., Andrushia, D., & Kodur, V. (2023). Residual Properties of Geopolymer Concrete for Post-Fire Evaluation of Structures. Materials, 16(17), 6065. https://doi.org/10.3390/ma16176065
Vancouver
Kanagaraj B, Anand N, Andrushia D, Kodur V. Residual Properties of Geopolymer Concrete for Post-Fire Evaluation of Structures. Materials. 2023;16(17):6065. doi:10.3390/ma16176065
BibTeX
@article{Kanagaraj2023,
author = {Kanagaraj, Balamurali and Anand, Nammalvar and Andrushia, Diana and Kodur, Venkatesh},
title = {Residual Properties of Geopolymer Concrete for Post-Fire Evaluation of Structures},
journal = {Materials},
year = {2023},
volume = {16},
number = {17},
pages = {6065},
doi = {10.3390/ma16176065}
}
EUVIMED