Effect of Grain Orientation on Microstructure and Mechanical Properties of FeCoCrNi High-Entropy Alloy Produced via Laser Melting Deposition
Materials · 31.08.2023 · 16 (17) · 5963
DOI: 10.3390/ma16175963 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.08.2023. Verfasst von Fuyu Ge und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Enterprise Science and Technology Commissioner Project.
Abstract (Originalsprache)
The long, straight grain boundary of the high-entropy alloy (HEA) produced via laser melting deposition (LMD) is prone to cracking due to unidirectional scanning (single wall). To enhance the competitive growth of columnar grains and improve the overall performance of the alloy, a vertical cross scanning method was employed to fabricate FeCoCrNi HEA (bulk). The influence of grain orientation on the microstructure and mechanical properties of FeCoCrNi-LMD was systematically investigated. Microhardness tests and tensile tests were conducted to assess the mechanical property differences between the single-wall and bulk samples. This study shows that using a single scanning strategy results in monolayer wall grains sized at 129.40 μm, with a max texture strength of 21.29. Employing orthogonal scanning yields 61.15 μm block-like grains with a max texture strength of 11.12. Dislocation densities are 1.084 × 1012 m−2 and 1.156 × 1012 m−2, with average Schmid factors of 0.471 and 0.416. In comparison to the FeCoCrNi-LMD single wall, the bulk material produced through cross-layer orthogonal scanning exhibited reduced residual stress, weakened anisotropy, and improved mechanical properties. These findings are expected to enhance the potential applications of FeCoCrNi-LMD in various industries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, China.
- School of Automobile Engineering, Changshu Institute of Technology, Changshu 215500, China.
- School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong, NSW 2522, Australia.
ORCID-Profile: Yangchuan Cai
Förderung
- National Natural Science Foundation of China
- Enterprise Science and Technology Commissioner Project
Zitieren
APA
Ge, F., Liu, S., Zhang, X., Shan, M., Peng, C., Jia, F., Han, J., & Cai, Y. (2023). Effect of Grain Orientation on Microstructure and Mechanical Properties of FeCoCrNi High-Entropy Alloy Produced via Laser Melting Deposition. Materials, 16(17), 5963. https://doi.org/10.3390/ma16175963
Vancouver
Ge F, Liu S, Zhang X, Shan M, Peng C, Jia F, et al. Effect of Grain Orientation on Microstructure and Mechanical Properties of FeCoCrNi High-Entropy Alloy Produced via Laser Melting Deposition. Materials. 2023;16(17):5963. doi:10.3390/ma16175963
BibTeX
@article{Ge2023,
author = {Ge, Fuyu and Liu, Shuai and Zhang, Xin and Shan, Mengdie and Peng, Cheng and Jia, Fanghui and Han, Jian and Cai, Yangchuan},
title = {Effect of Grain Orientation on Microstructure and Mechanical Properties of FeCoCrNi High-Entropy Alloy Produced via Laser Melting Deposition},
journal = {Materials},
year = {2023},
volume = {16},
number = {17},
pages = {5963},
doi = {10.3390/ma16175963}
}
EUVIMED