EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Absorption Band Tunable La-Sr Co-Doped BaCo2-W Type Hexaferrites

Juan Li iD, Xuetao Sun

Materials · 29.08.2023 · 16 (17) · 5897

DOI: 10.3390/ma16175897 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.08.2023. Verfasst von Juan Li und 1 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program, Key Project of the National Natural Science Foundation of China, Key Research and Development Program of Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

La-Sr co-doped Ba1−x(La0.5Sr0.5)xCo2Fe16O27 (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0, respectively) hexaferrites were prepared by the solid-state method. W-type hexaferrite single phase structure with space group P63/mmc was obtained when the doping amount was x < 0.4 and an M-type hexaferrite and a spinel phase with smaller grains gradually replaced the W phase as the primary phases when x ≥ 0.6. The maximum Ms is 76.2 emu/g and the minimum Hc is 60 Oe at x = 0.4, as obtained by VSM analysis. The magnetoelectric properties of the samples were tested at 1–18 GHz with a vector network analyzer and the reflection loss was calculated based on transmission line theory. It was found that the introduction of an appropriate amount of La-Sr provides a large number of porosity defects while increasing the grain size, which can effectively improve the reflection of electromagnetic waves inside the material and dissipate more energy. At the same time, co-doping also makes the resonance frequency of the samples shift to lower frequency, resulting in tunable absorption properties in the C, X and Ku bands. When x = 0.2, the minimum reflection loss is −40.61 dB at 1.5 mm thickness, with the effective absorption bandwidth of 5.76 GHz in the X band; when x = 0.4, the minimum reflection loss is −37.45 dB at 2.5 mm, with the bandwidth of 4.97 GHz in the C band; when x = 0.6, the material has good absorption in both the X and Ku bands with the thickness less than 2 mm. The simple preparation method and good performance make La-Sr co-doped Co2W ferrite a promising microwave absorbing material.

Schlagwörter

Stichwörter der Autor:innen

W-type hexagonal ferritemicrowave absorption materialsreflection losstunable absorption band

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China.
  • Research Center of Magnetic and Electronic Materials, Zhejiang University of Technology, Hangzhou 310014, China.

ORCID-Profile: Juan Li

Förderung

  • National Key Research and Development Program
  • Key Project of the National Natural Science Foundation of China
  • Key Research and Development Program of Zhejiang Province

Zitieren

APA

Li, J., & Sun, X. (2023). Absorption Band Tunable La-Sr Co-Doped BaCo2-W Type Hexaferrites. Materials, 16(17), 5897. https://doi.org/10.3390/ma16175897

Vancouver

Li J, Sun X. Absorption Band Tunable La-Sr Co-Doped BaCo2-W Type Hexaferrites. Materials. 2023;16(17):5897. doi:10.3390/ma16175897

BibTeX
@article{Li2023,
  author = {Li, Juan and Sun, Xuetao},
  title = {Absorption Band Tunable La-Sr Co-Doped BaCo2-W Type Hexaferrites},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {17},
  pages = {5897},
  doi = {10.3390/ma16175897}
}
Kostenlos starten →