Field Investigation of the Dynamic Response of Culvert–Embankment–Culvert Transitions in a High-Speed Railway
Materials · 25.08.2023 · 16 (17) · 5832
DOI: 10.3390/ma16175832 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.08.2023. Verfasst von Ping Hu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Management, Hunan University of Finance and Economics, Changsha 410205, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Excellent Youth Fund of Hunan Provincial Department of Education, Hunan Provincial Natural Science Foundation of China.
Abstract (Originalsprache)
The stiffnesses of embankments and culverts differ in the transition sections of high-speed railways (HSRs) due to their different supporting conditions. The dynamic irregularity caused by the different stiffnesses makes this transition area the weakest part of high-speed railways. Graded crushed stone combined with 5% cement is typically used to fill the subgrade in these transition areas. Thus, three different particle size ratios of crushed stone were matched and tested regarding the construction parameters to explore the most suitable materials to fill the roadbed in a transition section. Then, field dynamic tests were carried out on the culvert–embankment–culvert transition area where trains run at speeds of 5–360 km/h. A time-domain analysis of the test data was performed to obtain the laws of variation that cause the dynamic characteristics to change with the railway line and roadbed layer and the changes induced by a train’s running speed, operating direction, and axle weight. The results indicate that (i) it is feasible to fill transition section roadbeds with well-graded crushed stone combined with 5% cement with optimal water contents; (ii) extreme dynamic responses in some special sections are observed, suggesting the value of taking special measures at the transition section. For example, the sections 14.5 m and 30 m from the 679 culvert and the bed layer should be specially stabilized; (iii) the train’s axle load and driving direction show a great effect on corresponding sections and layers but present a small effect on the sections and layers nearby; and (iv) 260 km/h is a critical speed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering Management, Hunan University of Finance and Economics, Changsha 410205, China.
- School of Civil Engineering, Central South University, Changsha 410075, China.
ORCID-Profile: Yu-Liang Lin
Förderung
- National Natural Science Foundation of China
- Excellent Youth Fund of Hunan Provincial Department of Education
- Hunan Provincial Natural Science Foundation of China
- National University Student Innovation and Entrepreneurship Project
Zitieren
APA
Hu, P., Liu, H., Tang, Y. Z., & Lin, Y. L. (2023). Field Investigation of the Dynamic Response of Culvert–Embankment–Culvert Transitions in a High-Speed Railway. Materials, 16(17), 5832. https://doi.org/10.3390/ma16175832
Vancouver
Hu P, Liu H, Tang YZ, Lin YL. Field Investigation of the Dynamic Response of Culvert–Embankment–Culvert Transitions in a High-Speed Railway. Materials. 2023;16(17):5832. doi:10.3390/ma16175832
BibTeX
@article{Hu2023,
author = {Hu, Ping and Liu, Huo and Tang, Yi-Zhi and Lin, Yu-Liang},
title = {Field Investigation of the Dynamic Response of Culvert–Embankment–Culvert Transitions in a High-Speed Railway},
journal = {Materials},
year = {2023},
volume = {16},
number = {17},
pages = {5832},
doi = {10.3390/ma16175832}
}
EUVIMED