EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Stability and Hot Corrosion Performance of the AlCoCrFeNi2.1 High-Entropy Alloy Coating by Laser Cladding

Li Zhang, Yan Ji, Bin Yang

Materials · 22.08.2023 · 16 (17) · 5747

DOI: 10.3390/ma16175747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.08.2023. Verfasst von Li Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Develop Plan of Shandong Province, China, Innovation Center of Nuclear Materials for National Defense Industry, Key R&D Program of Shandong Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Both crack-free AlCoCrFeNi2.1 eutectic high-entropy alloy (EHEA) and Y and Hf co-doping AlCoCrFeNi2.1 EHEA (YHf-EHEA) coatings were prepared by laser cladding. The solidification microstructure, thermal stability, and hot corrosion performance of the coatings at 900 °C under 75% Na2SO4 + 25% NaCl molten salts were investigated. The experimental results showed that the structure of the as-deposited coatings consisted of FCC and BCC/B2 phases. After heat treatment, an Al-rich L12 phase was precipitated in the FCC phase of all coatings. The grain sizes of the EHEA and YHf-EHEA coatings after heat treatment at 900 °C for 10 h increased by 27.5% and 15.7%, respectively, compared to the as-deposited coatings. Meanwhile, after hot corrosion, the spallation areas of the YHf-EHEA and EHEA coatings accounted for 14.98% and 5.67% of the total surface area, respectively. In this study, the Y and Hf co-doping did not change the microstructure morphology and phase structure of the coatings but did improve the thermal stability and resistance of the hot corrosion oxide scale spallation, providing a certain amount of data and theoretical support for the application of EHEA coatings as high-temperature protective coatings.

Schlagwörter

Stichwörter der Autor:innen

high-entropy alloyhot corrosionlaser claddingthermal stability

Autor:innen und Institutionen

  • Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China.

Förderung

  • Key Research and Develop Plan of Shandong Province, China
  • Innovation Center of Nuclear Materials for National Defense Industry
  • Key R&D Program of Shandong Province, China

Zitieren

APA

Zhang, L., Ji, Y., & Yang, B. (2023). Thermal Stability and Hot Corrosion Performance of the AlCoCrFeNi2.1 High-Entropy Alloy Coating by Laser Cladding. Materials, 16(17), 5747. https://doi.org/10.3390/ma16175747

Vancouver

Zhang L, Ji Y, Yang B. Thermal Stability and Hot Corrosion Performance of the AlCoCrFeNi2.1 High-Entropy Alloy Coating by Laser Cladding. Materials. 2023;16(17):5747. doi:10.3390/ma16175747

BibTeX
@article{Zhang2023,
  author = {Zhang, Li and Ji, Yan and Yang, Bin},
  title = {Thermal Stability and Hot Corrosion Performance of the AlCoCrFeNi2.1 High-Entropy Alloy Coating by Laser Cladding},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {17},
  pages = {5747},
  doi = {10.3390/ma16175747}
}
Kostenlos starten →