Effect of Tempering Temperature on Hydrogen Embrittlement of SCM440 Tempered Martensitic Steel
Materials · 21.08.2023 · 16 (16) · 5709
DOI: 10.3390/ma16165709 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.08.2023. Verfasst von Sang-Gyu Kim und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy (MOTIE), National Research Foundation of Korea.
Abstract (Originalsprache)
The effect of tempering temperature on the hydrogen embrittlement characteristics of SCM440 tempered martensitic steels was investigated in terms of their microstructure and hydrogen desorption behavior. The microstructures were characterized using scanning and transmission electron microscopy, as well as X-ray diffraction and electron backscattered diffraction analysis. Thermal desorption analysis (TDA) was performed to examine the amount and trapping behavior of hydrogen. The cementite morphology of the SCM440 tempered martensitic steels gradually changed from a long lamellar shape to a segmented short-rod shape with an increasing tempering temperature. A slow strain rate tensile test was conducted after electrochemical hydrogen charging to evaluate the hydrogen embrittlement resistance. The hydrogen embrittlement resistance of the SCM440 tempered martensitic steels increased with an increasing tempering temperature because of the decrease in the fraction of the low-angle grain boundaries and dislocation density. The low-angle grain boundaries and dislocations, which acted as reversible hydrogen trap sites, were critical factors in determining the hydrogen embrittlement resistance, and this was supported by the decreased diffusible hydrogen content as measured by TDA. Fine carbides formed in the steel tempered at a relatively higher temperature acted as irreversible hydrogen trap sites and contributed to improving the hydrogen embrittlement resistance. Our findings can suggest that the tempering temperature of SCM440 tempered martensitic steel plays an important role in determining its hydrogen embrittlement resistance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea.
- R&D Center, SeAH Besteel, Gunsan 54007, Republic of Korea.
ORCID-Profile: Byoungchul Hwang
Förderung
- Ministry of Trade, Industry and Energy (MOTIE)
- National Research Foundation of Korea
Zitieren
APA
Kim, S. G., Kim, J. Y., & Hwang, B. (2023). Effect of Tempering Temperature on Hydrogen Embrittlement of SCM440 Tempered Martensitic Steel. Materials, 16(16), 5709. https://doi.org/10.3390/ma16165709
Vancouver
Kim SG, Kim JY, Hwang B. Effect of Tempering Temperature on Hydrogen Embrittlement of SCM440 Tempered Martensitic Steel. Materials. 2023;16(16):5709. doi:10.3390/ma16165709
BibTeX
@article{Kim2023,
author = {Kim, Sang-Gyu and Kim, Jae-Yun and Hwang, Byoungchul},
title = {Effect of Tempering Temperature on Hydrogen Embrittlement of SCM440 Tempered Martensitic Steel},
journal = {Materials},
year = {2023},
volume = {16},
number = {16},
pages = {5709},
doi = {10.3390/ma16165709}
}
EUVIMED