EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study of the Shear Performance of Combined Concrete–ECC Beams without Web Reinforcement

Kai Cheng, Yulin Du, Haiyan Wang, Rui Liu, Yu Sun iD, Zhichao Lu, Lingkun Chen iD

Materials · 20.08.2023 · 16 (16) · 5706

DOI: 10.3390/ma16165706 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.08.2023. Verfasst von Kai Cheng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Fourth Engineering Company Limited, China National Chemical Communications Construction Group Co., Ltd., Binzhou 256200, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the 2023 Yangzhou Key R&D Program (Social Development), the Natural Science Foundation of Jiangsu Province of China, the Key Technologies Research and Development Program (CN).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Shear damage of beams is typically brittle damage that is significantly more detrimental than flexural damage.

Purpose

Based on the super-high toughness and good crack control ability of engineered cementitious composites (ECC), the shear performance of concrete–ECC beams was investigated by replacing a portion of the concrete in the tensile zone of reinforced concrete beams with ECC and employing high-strength reinforcing bars to design concrete–ECC beams. The purpose of this investigation is to elucidate and clarify the shear performance of concrete–ECC beams. Methodology/approach: Experimental and FE analyses were conducted on the shear performance of 36 webless reinforced concrete–ECC composite beams with varied concrete strengths, shear-to-span ratios, ECC thicknesses, and interfacial treatments between the layers.

Results

The results indicate that the effect of the shear-to-span ratio is greater, the effect of the form of interface treatment is smaller, the effect is weakened after the ECC thickness is greater than 70 mm (i.e., the ratio of the replacement height to section height is approximately 0.35), the shear resistance is reduced when the hoop rate is greater, and the best shear resistance is obtained when the ECC 70 mm thickness and the hoop rate of 0.29% are used together.

Conclusions

This study can serve as a technical reference for enhancing the problems of low durability and inadequate fracture control performance of RC beams in shear and as a guide for structural design research.

Schlagwörter

Stichwörter der Autor:innen

FE simulationconcrete–ECC composite beamparametric analysisshear performance

Autor:innen und Institutionen

  • Fourth Engineering Company Limited, China National Chemical Communications Construction Group Co., Ltd., Binzhou 256200, China.
  • Shijiazhuang Institute of Railway Technology, Shijiazhuang 050041, China.
  • College of Transportation Science & Engineering, Nanjing Tech University, Nanjing 211816, China.
  • College of Architecture Science and Engineering, Yangzhou University, Yangzhou 225127, China.

ORCID-Profile: Yu Sun, Lingkun Chen

Förderung

  • the 2023 Yangzhou Key R&D Program (Social Development)
  • the Natural Science Foundation of Jiangsu Province of China
  • the Key Technologies Research and Development Program (CN)

Zitieren

APA

Cheng, K., Du, Y., Wang, H., Liu, R., Sun, Y., Lu, Z., & Chen, L. (2023). Experimental Study of the Shear Performance of Combined Concrete–ECC Beams without Web Reinforcement. Materials, 16(16), 5706. https://doi.org/10.3390/ma16165706

Vancouver

Cheng K, Du Y, Wang H, Liu R, Sun Y, Lu Z, et al. Experimental Study of the Shear Performance of Combined Concrete–ECC Beams without Web Reinforcement. Materials. 2023;16(16):5706. doi:10.3390/ma16165706

BibTeX
@article{Cheng2023,
  author = {Cheng, Kai and Du, Yulin and Wang, Haiyan and Liu, Rui and Sun, Yu and Lu, Zhichao and Chen, Lingkun},
  title = {Experimental Study of the Shear Performance of Combined Concrete–ECC Beams without Web Reinforcement},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {16},
  pages = {5706},
  doi = {10.3390/ma16165706}
}
Kostenlos starten →