EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Mechanical Properties of Al2O3 Nanoceramics via Low Temperature Spark Plasma Sintering of Amorphous Powders

Dongjiang Zhang, Rui Yu, Xuelei Feng, Xuncheng Guo, Yongkang Yang, Xiqing Xu

Materials · 17.08.2023 · 16 (16) · 5652

DOI: 10.3390/ma16165652 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.08.2023. Verfasst von Dongjiang Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Xi'an Modern Control Technology Research Institute, Xi'an 710065, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Nature Science Foundation of China, Fundamental Research Funds for the Central Universities, CHD.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, Al2O3 nanoceramics were prepared by spark plasma sintering of amorphous powders and polycrystalline powders with similar particle sizes. Effective comparisons of sintering processes and ultimate products depending on starting powder conditions were explored. To ensure near-full density higher than 98% of the Al2O3 nanoceramics, the threshold temperature in SPS is 1450 °C for polycrystalline Al2O3 powders and 1300 °C for amorphous powders. The low SPS temperature for amorphous powders is attributed to the metastable state with high free energy of amorphous powders. The Al2O3 nanoceramics prepared by amorphous powders display a mean grain size of 170 nm, and superior mechanical properties, including high bending strength of 870 MPa, Vickers hardness of 20.5 GPa and fracture toughness of 4.3 MPa∙m1/2. Furthermore, the Al2O3 nanoceramics prepared by amorphous powders showed a larger dynamic strength and dynamic strain. The toughening mechanism with predominant transgranular fracture is explained based on the separation of quasi-boundaries.

Schlagwörter

Stichwörter der Autor:innen

Al2O3 nanoceramicsamorphouslow temperature sinteringspark plasma sinteringtransgranular fracture

Autor:innen und Institutionen

  • Xi'an Modern Control Technology Research Institute, Xi'an 710065, China.
  • School of Materials Science & Engineering, Chang'an University, Xi'an 710061, China.

Förderung

  • National Nature Science Foundation of China
  • Fundamental Research Funds for the Central Universities, CHD

Zitieren

APA

Zhang, D., Yu, R., Feng, X., Guo, X., Yang, Y., & Xu, X. (2023). Enhanced Mechanical Properties of Al2O3 Nanoceramics via Low Temperature Spark Plasma Sintering of Amorphous Powders. Materials, 16(16), 5652. https://doi.org/10.3390/ma16165652

Vancouver

Zhang D, Yu R, Feng X, Guo X, Yang Y, Xu X. Enhanced Mechanical Properties of Al2O3 Nanoceramics via Low Temperature Spark Plasma Sintering of Amorphous Powders. Materials. 2023;16(16):5652. doi:10.3390/ma16165652

BibTeX
@article{Zhang2023,
  author = {Zhang, Dongjiang and Yu, Rui and Feng, Xuelei and Guo, Xuncheng and Yang, Yongkang and Xu, Xiqing},
  title = {Enhanced Mechanical Properties of Al2O3 Nanoceramics via Low Temperature Spark Plasma Sintering of Amorphous Powders},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {16},
  pages = {5652},
  doi = {10.3390/ma16165652}
}
Kostenlos starten →