Recent Advances in Additive Manufacturing of Soft Magnetic Materials: A Review
Materials · 13.08.2023 · 16 (16) · 5610
DOI: 10.3390/ma16165610 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 13.08.2023. Verfasst von Bryan Ramiro Rodriguez-Vargas und 5 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento di Ingegneria, Università degli Studi di Perugia, Via G. Duranti 93, 06125 Perugia, Italy. Die Arbeit wurde bisher 91-mal zitiert (Crossref) und nennt 170 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regione Umbria in the framework of “Piano Sviluppo e Coesione FSC ex DGR n. 251/2021—Avviso ricerca 2020—Determinazione Dirigenziale n. 13637 del 27/12/2022—co….
Abstract (Originalsprache)
Additive manufacturing (AM) is an attractive set of processes that are being employed lately to process specific materials used in the fabrication of electrical machine components. This is because AM allows for the preservation or enhancement of their magnetic properties, which may be degraded or limited when manufactured using other traditional processes. Soft magnetic materials (SMMs), such as Fe–Si, Fe–Ni, Fe–Co, and soft magnetic composites (SMCs), are suitable materials for electrical machine additive manufacturing components due to their magnetic, thermal, mechanical, and electrical properties. In addition to these, it has been observed in the literature that other alloys, such as soft ferrites, are difficult to process due to their low magnetization and brittleness. However, thanks to additive manufacturing, it is possible to leverage their high electrical resistivity to make them alternative candidates for applications in electrical machine components. It is important to highlight the significant progress in the field of materials science, which has enabled the development of novel materials such as high-entropy alloys (HEAs). These alloys, due to their complex chemical composition, can exhibit soft magnetic properties. The aim of the present work is to provide a critical review of the state-of-the-art SMMs manufactured through different AM technologies. This review covers the influence of these technologies on microstructural changes, mechanical strengths, post-processing, and magnetic parameters such as saturation magnetization (MS), coercivity (HC), remanence (Br), relative permeability (Mr), electrical resistivity (r), and thermal conductivity (k).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dipartimento di Ingegneria, Università degli Studi di Perugia, Via G. Duranti 93, 06125 Perugia, Italy.
- Seamthesis Srl, Via IV Novembre 156, 29122 Piacenza, Italy.
- Department of Strategic Planning and Technology Management, Universidad Popular Autónoma del Estado de Puebla, 17 Sur, 901, Barrio de Santiago, Puebla 72410, Mexico.
ORCID-Profile: Bryan Ramiro Rodriguez-Vargas, Giulia Stornelli, Argelia Fabiola Miranda Pérez, Andrea Di Schino
Förderung
- Regione Umbria in the framework of “Piano Sviluppo e Coesione FSC ex DGR n. 251/2021—Avviso ricerca 2020—Determinazione Dirigenziale n. 13637 del 27/12/2022—co…
Zitieren
APA
Rodriguez-Vargas, B. R., Stornelli, G., Folgarait, P., Ridolfi, M. R., Miranda Pérez, A. F., & Di Schino, A. (2023). Recent Advances in Additive Manufacturing of Soft Magnetic Materials: A Review. Materials, 16(16), 5610. https://doi.org/10.3390/ma16165610
Vancouver
Rodriguez-Vargas BR, Stornelli G, Folgarait P, Ridolfi MR, Miranda Pérez AF, Di Schino A. Recent Advances in Additive Manufacturing of Soft Magnetic Materials: A Review. Materials. 2023;16(16):5610. doi:10.3390/ma16165610
BibTeX
@article{RodriguezVargas2023,
author = {Rodriguez-Vargas, Bryan Ramiro and Stornelli, Giulia and Folgarait, Paolo and Ridolfi, Maria Rita and Miranda Pérez, Argelia Fabiola and Di Schino, Andrea},
title = {Recent Advances in Additive Manufacturing of Soft Magnetic Materials: A Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {16},
pages = {5610},
doi = {10.3390/ma16165610}
}
EUVIMED