Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling
Materials · 12.08.2023 · 16 (16) · 5601
DOI: 10.3390/ma16165601 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.08.2023. Verfasst von Yannis P Korkolis und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Integrated Systems Engineering, The Ohio State University, 234 Baker Systems, 1971 Neil Avenue, Columbus, OH 43210, USA. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSF, JSPS KAKENHI Grant-in-Aid for Scientific Research (c).
Abstract (Originalsprache)
The deformation-induced surface roughening of an Al-Mg alloy is analyzed using a combination of experiments and modeling. A mesoscale oligocrystal of AA5052-O, obtained by recrystallization annealing and subsequent thickness reduction by machining, that contains approx. 40 grains is subjected to uniaxial tension. The specimen contains one layer of grains through the thickness. A laser confocal microscope is used to measure the surface topography of the deformed specimen. A finite element model with realistic (non-columnar) shapes of the grains based on a pair of Electron Back-Scatter Diffraction (EBSD) scans of a given specimen is constructed using a custom-developed shape interpolation procedure. A Crystal Plasticity Finite Element (CPFE) framework is then applied to the voxel model of the tension test of the oligocrystal. The unknown material parameters are determined inversely using an efficient, custom-built optimizer. Predictions of the deformed shape of the specimen, surface topography, evolution of the average roughness with straining and texture evolution are compared to experiments. The model reproduces the averaged features of the problem, while missing some local details. As an additional verification of the CPFE model, the statistics of surface roughening are analyzed by simulating uniaxial tension of an AA5052-O polycrystal and comparing it to experiments. The averaged predictions are found to be in good agreement with the experimentally observed trends. Finally, using the same polycrystalline specimen, texture–morphology relations are discovered, using a symbolic Monte Carlo approach. Simple relations between the Schmid factor and roughness can be inferred purely from the experiments. Novelties of this work include: realistic 3D shapes of the grains; efficient and accurate identification of material parameters instead of manual tuning; a fully analytical Jacobian for the crystal plasticity model with quadratic convergence; novel texture–morphology relations for polycrystal.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Integrated Systems Engineering, The Ohio State University, 234 Baker Systems, 1971 Neil Avenue, Columbus, OH 43210, USA.
- Department of Mechanical Engineering, University of New Hampshire, 33 Academic Way, Durham, NH 03824, USA.
- Department of Mechanical Engineering, Tokyo Metropolitan University, 1-1 Minami-Osawa, Hachioji-shi, Tokyo 192-0397, Japan.
- Institute of Industrial Science, University of Tokyo, Komaba 4-6-1, Meguro, Tokyo 153-8505, Japan.
ORCID-Profile: Yannis P Korkolis
Förderung
- NSF
- JSPS KAKENHI Grant-in-Aid for Scientific Research (c)
Zitieren
APA
Korkolis, Y. P., Knysh, P., Sasaki, K., Furushima, T., & Knezevic, M. (2023). Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling. Materials, 16(16), 5601. https://doi.org/10.3390/ma16165601
Vancouver
Korkolis YP, Knysh P, Sasaki K, Furushima T, Knezevic M. Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling. Materials. 2023;16(16):5601. doi:10.3390/ma16165601
BibTeX
@article{Korkolis2023,
author = {Korkolis, Yannis P and Knysh, Paul and Sasaki, Kanta and Furushima, Tsuyoshi and Knezevic, Marko},
title = {Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling},
journal = {Materials},
year = {2023},
volume = {16},
number = {16},
pages = {5601},
doi = {10.3390/ma16165601}
}
EUVIMED