EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Aluminium Matrix Composite Materials Reinforced by 3D-Printed Ceramic Preforms

Marek Kremzer iD, Błażej Tomiczek iD, Grzegorz Matula, Michał Gocki, Łukasz Krzemiński iD

Materials · 04.08.2023 · 16 (15) · 5473

DOI: 10.3390/ma16155473 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.08.2023. Verfasst von Marek Kremzer und 4 weiteren Autor:innen. Beteiligte Einrichtung: Scientific and Didactic Laboratory of Nanotechnology and Material Technologies, Faculty of Mechanical Engineering, Silesian University of Technology,…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article employed the fused deposition modelling (FDM) method and gas-pressure infiltration to manufacture alumina/AlSi12 composites. Porous ceramic skeletons were prepared by FDM 3D printing of two different alumina powder-filed filaments. The organic component was removed using a combination of solvent and heat debinding, and the materials were then sintered at 1500 °C to complete the process. Thermogravimetric tests and DTA analysis were performed to develop an appropriate degradation and sintering program. Manufactured skeletons were subjected to microstructure analysis, porosity analysis, and bending test. The sintering process produced porous alumina ceramic samples with no residual carbon content. Open porosity could occur due to the binder’s degradation. Liquid metal was infiltrated into the ceramic, efficiently filling any open pores and forming a three-dimensional network of the aluminium phase. The microstructure and characteristics of the fabricated materials were investigated using high-resolution scanning electron microscopy, computer tomography, hardness testing, and bending strength testing. The developed composite materials are characterized by the required structure—low porosity and homogenous distribution of the reinforcing phase, better mechanical properties than their matrix and more than twice as high hardness. Hence, the developed innovative technology of their manufacturing can be used in practice.

Schlagwörter

Stichwörter der Autor:innen

Fused Deposition Modeling (FDM)gas-pressure infiltrationmetal matrix composite

Autor:innen und Institutionen

  • Scientific and Didactic Laboratory of Nanotechnology and Material Technologies, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18a St., 44-100 Gliwice, Poland.

ORCID-Profile: Marek Kremzer, Błażej Tomiczek, Łukasz Krzemiński

Förderung

  • Silesian University of Technology

Zitieren

APA

Kremzer, M., Tomiczek, B., Matula, G., Gocki, M., & Krzemiński, Ł. (2023). Aluminium Matrix Composite Materials Reinforced by 3D-Printed Ceramic Preforms. Materials, 16(15), 5473. https://doi.org/10.3390/ma16155473

Vancouver

Kremzer M, Tomiczek B, Matula G, Gocki M, Krzemiński Ł. Aluminium Matrix Composite Materials Reinforced by 3D-Printed Ceramic Preforms. Materials. 2023;16(15):5473. doi:10.3390/ma16155473

BibTeX
@article{Kremzer2023,
  author = {Kremzer, Marek and Tomiczek, Błażej and Matula, Grzegorz and Gocki, Michał and Krzemiński, Łukasz},
  title = {Aluminium Matrix Composite Materials Reinforced by 3D-Printed Ceramic Preforms},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {15},
  pages = {5473},
  doi = {10.3390/ma16155473}
}
Kostenlos starten →