EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Alkali Metals (Li, Na, and K) on Ni/CaO Dual-Functional Materials for Integrated CO2 Capture and Hydrogenation

Yong Hu, Qian Xu iD, Yao Sheng iD, Xueguang Wang, Hongwei Cheng iD, Xingli Zou, Xionggang Lu iD

Materials · 02.08.2023 · 16 (15) · 5430

DOI: 10.3390/ma16155430 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2023. Verfasst von Yong Hu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Special Steel, School of Materials Science and Engineering, Shanghai University, 99 Shangda Road, BaoShan District, …. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Commission of Shanghai Municipality, Shanghai Engineering Research Center of Green Remanufacture of Metal Parts.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ni/CaO, a low-cost dual-functional material (DFM), has been widely studied for integrated CO2 capture and hydrogenation. The core of this dual-functional material should possess both good CO2 capture–conversion performance and structural stability. Here, we synthesized Ni/CaO DFMs modified with alkali metals (Na, K, and Li) through a combination of precipitation and combustion methods. It was found that Na-modified Ni/CaO (Na-Ni/CaO) DFM offered stable CO2 capture–conversion activity over 20 cycles, with a high CO2 capture capacity of 10.8 mmol/g and a high CO2 conversion rate of 60.5% at the same temperature of 650 °C. The enhanced CO2 capture capacity was attributed to the improved surface basicity of Na-Ni/CaO. In addition, the incorporation of Na into DFMs had a favorable effect on the formation of double salts, which shorten the CO2 capture and release process and promoted DFM stability by hindering their aggregation and the sintering of DFMs.

Schlagwörter

Stichwörter der Autor:innen

CO2 capture and hydrogenationNi/CaOalkali metaldual-functional materialreverse water–gas shift

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Special Steel, School of Materials Science and Engineering, Shanghai University, 99 Shangda Road, BaoShan District, Shanghai 200444, China.

ORCID-Profile: Qian Xu, Yao Sheng, Hongwei Cheng, Xionggang Lu

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Commission of Shanghai Municipality
  • Shanghai Engineering Research Center of Green Remanufacture of Metal Parts

Zitieren

APA

Hu, Y., Xu, Q., Sheng, Y., Wang, X., Cheng, H., Zou, X., & Lu, X. (2023). The Effect of Alkali Metals (Li, Na, and K) on Ni/CaO Dual-Functional Materials for Integrated CO2 Capture and Hydrogenation. Materials, 16(15), 5430. https://doi.org/10.3390/ma16155430

Vancouver

Hu Y, Xu Q, Sheng Y, Wang X, Cheng H, Zou X, et al. The Effect of Alkali Metals (Li, Na, and K) on Ni/CaO Dual-Functional Materials for Integrated CO2 Capture and Hydrogenation. Materials. 2023;16(15):5430. doi:10.3390/ma16155430

BibTeX
@article{Hu2023,
  author = {Hu, Yong and Xu, Qian and Sheng, Yao and Wang, Xueguang and Cheng, Hongwei and Zou, Xingli and Lu, Xionggang},
  title = {The Effect of Alkali Metals (Li, Na, and K) on Ni/CaO Dual-Functional Materials for Integrated CO2 Capture and Hydrogenation},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {15},
  pages = {5430},
  doi = {10.3390/ma16155430}
}
Kostenlos starten →