EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ultrasonic Frequency on Structure and Corrosion Properties of Coating Formed on Magnesium Alloy via Plasma Electrolytic Oxidation

Siti Fatimah iD, Farah Hazmatulhaq, Yujun Sheng, Tri Suhartono, Jeong Moo Oh, Nisa Nashrah, Jee-Hyun Kang iD, Young Gun Ko iD

Materials · 02.08.2023 · 16 (15) · 5424

DOI: 10.3390/ma16155424 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2023. Verfasst von Siti Fatimah und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Industrial Innovation Talent Growth Project of the Korean Ministry of Trade, Industry and Energy, Korea Institute for Advancement of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the application of ultrasonic vibration during plasma electrolytic oxidation (PEO) to enhance the corrosion resistance of magnesium (Mg) alloy. To this end, three different ultrasonic frequencies of 0, 40, and 135 kHz were utilized during PEO. In the presence of ultrasonic waves, the formation of a uniform and dense oxide layer on Mg alloys is facilitated. This is achieved through plasma softening, acoustic streaming, and improved mass transport for successful deposition and continuous reforming of the oxide layer. The oxide layer exhibits superior protective properties against corrosive environments due to the increase in compactness. Increasing ultrasonic frequency from 40 to 135 kHz, however, suppresses the optimum growth of the oxide layer due to the occurrence of super-soft plasma swarms, which results in a low coating thickness. The integration of ultrasonic vibration with PEO presents a promising avenue for practical implementation in industries seeking to enhance the corrosion protection of Mg alloys, manipulating microstructures and composition.

Schlagwörter

Stichwörter der Autor:innen

corrosionmagnesium alloysplasma electrolytic oxidationultrasonic frequency

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea.

ORCID-Profile: Siti Fatimah, Jee-Hyun Kang, Young Gun Ko

Förderung

  • Industrial Innovation Talent Growth Project of the Korean Ministry of Trade, Industry and Energy
  • Korea Institute for Advancement of Technology

Zitieren

APA

Fatimah, S., Hazmatulhaq, F., Sheng, Y., Suhartono, T., Oh, J. M., Nashrah, N., Kang, J. H., & Ko, Y. G. (2023). Effect of Ultrasonic Frequency on Structure and Corrosion Properties of Coating Formed on Magnesium Alloy via Plasma Electrolytic Oxidation. Materials, 16(15), 5424. https://doi.org/10.3390/ma16155424

Vancouver

Fatimah S, Hazmatulhaq F, Sheng Y, Suhartono T, Oh JM, Nashrah N, et al. Effect of Ultrasonic Frequency on Structure and Corrosion Properties of Coating Formed on Magnesium Alloy via Plasma Electrolytic Oxidation. Materials. 2023;16(15):5424. doi:10.3390/ma16155424

BibTeX
@article{Fatimah2023,
  author = {Fatimah, Siti and Hazmatulhaq, Farah and Sheng, Yujun and Suhartono, Tri and Oh, Jeong Moo and Nashrah, Nisa and Kang, Jee-Hyun and Ko, Young Gun},
  title = {Effect of Ultrasonic Frequency on Structure and Corrosion Properties of Coating Formed on Magnesium Alloy via Plasma Electrolytic Oxidation},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {15},
  pages = {5424},
  doi = {10.3390/ma16155424}
}
Kostenlos starten →