Silicon-Based Superslippery/Superhydrophilic Striped Surface for Highly Efficient Fog Harvesting
Materials · 02.08.2023 · 16 (15) · 5423
DOI: 10.3390/ma16155423 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2023. Verfasst von Xiang Ji und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Project Program of SJTU-Pinghu Institute of Intelligent Optoelectronics, Project Program of SJTU-Pinghu Institute of Intelligent Optoelectronics.
Abstract (Originalsprache)
Fog-harvesting performance is influenced by surface wettability, patterned structure and the heat transfer coefficient. In this work, we have prepared different surfaces with a stripe array of superhydrophilic, superslippery and superslippery/superhydrophilic surfaces for fog harvesting on silicon substrates using photolithography and silver-assisted chemical etching. The surface wettability and heat transfer coefficients of the above samples have been investigated. We analyzed the contact angle, sliding angle and transport state of droplets on these surfaces. The fog-harvesting rate of all samples under different voltages of the cooling pad (V = 0, 2.0, 2.5, 3.0, 3.5 V) was measured. Results showed that the superslippery/superhydrophilic striped surface could achieve rapid droplet nucleation, directional transport and efficient collection due to its superhydrophilic striated channels and the Laplace pressure difference between different wettability regions. At a condensation voltage of 3.5 V, the fog-harvesting rate efficiencies of the uniformly striped superhydrophilic and superslippery surface were 1351 mg·cm−2·h−1 and 1265 mg·cm−2·h−1, respectively, while the fog-harvesting rate of the superslippery/superhydrophilic striped surface was 1748 mg·cm−2·h−1. Compared with the original silicon surface, the maximum fog-harvesting rate of the superslippery/superhydrophilic striped surface was improved by 86.9%. This study offers significant insights into the impact of heat transfer and silicon surface wettability on the process of fog collection.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China.
- SJTU-Pinghu Institute of Intelligent Optoelectronics, Jiaxing 314200, China.
Förderung
- Open Project Program of SJTU-Pinghu Institute of Intelligent Optoelectronics
- Project Program of SJTU-Pinghu Institute of Intelligent Optoelectronics
Zitieren
APA
Ji, X., Shuai, S., Liu, S., Weng, Y., & Zheng, F. (2023). Silicon-Based Superslippery/Superhydrophilic Striped Surface for Highly Efficient Fog Harvesting. Materials, 16(15), 5423. https://doi.org/10.3390/ma16155423
Vancouver
Ji X, Shuai S, Liu S, Weng Y, Zheng F. Silicon-Based Superslippery/Superhydrophilic Striped Surface for Highly Efficient Fog Harvesting. Materials. 2023;16(15):5423. doi:10.3390/ma16155423
BibTeX
@article{Ji2023,
author = {Ji, Xiang and Shuai, Shunxu and Liu, Shuai and Weng, Yuyan and Zheng, Fengang},
title = {Silicon-Based Superslippery/Superhydrophilic Striped Surface for Highly Efficient Fog Harvesting},
journal = {Materials},
year = {2023},
volume = {16},
number = {15},
pages = {5423},
doi = {10.3390/ma16155423}
}
EUVIMED