EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Research on the Use of a Selected Multi-Criteria Method for the Cutting of Titanium Alloy with an Abrasive Water Jet

Aleksandra Radomska-Zalas iD

Materials · 01.08.2023 · 16 (15) · 5405

DOI: 10.3390/ma16155405 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.08.2023. Verfasst von Aleksandra Radomska-Zalas. Beteiligte Einrichtung: Faculty of Technology, Jacob of Paradies University, 66-400 Gorzow Wielkopolski, Poland. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of selected multi-criteria decision methods for the optimization of cutting processes by abrasive water jet methods is increasingly being used in industrial processes. This is due to the complexity of the processes and the need to reduce operating costs. Process optimization methods are available to support organizational processes including the design phase, quality assurance, production automation, and many more. This article presents the current state of research on the water-abrasive cutting process and the use of multi-criteria methods in optimizing this process. This article presents a detailed methodological study of the VIKOR approach to optimization, indicating the applicability conditions, assumptions, and limitations on the example of high-pressure abrasive water jet cutting of elements made of titanium alloy utilizing HPX garnet abrasive. As a result of the research conducted, the best input parameters of the cutting process for abrasive flow rate, pressure, and the traverse speed of the cutting process were determined. The achieved result is consistent with the assumption that the most favorable output parameters are the highest cutting depth and the lowest level of roughness.

Schlagwörter

Stichwörter der Autor:innen

VIKOR methodabrasive water jet cutting processadvanced manufacturing process

Autor:innen und Institutionen

  • Faculty of Technology, Jacob of Paradies University, 66-400 Gorzow Wielkopolski, Poland.

ORCID-Profile: Aleksandra Radomska-Zalas

Förderung

  • Ministry of Education and Science Poland

Zitieren

APA

Radomska-Zalas, A. (2023). Experimental Research on the Use of a Selected Multi-Criteria Method for the Cutting of Titanium Alloy with an Abrasive Water Jet. Materials, 16(15), 5405. https://doi.org/10.3390/ma16155405

Vancouver

Radomska-Zalas A. Experimental Research on the Use of a Selected Multi-Criteria Method for the Cutting of Titanium Alloy with an Abrasive Water Jet. Materials. 2023;16(15):5405. doi:10.3390/ma16155405

BibTeX
@article{RadomskaZalas2023,
  author = {Radomska-Zalas, Aleksandra},
  title = {Experimental Research on the Use of a Selected Multi-Criteria Method for the Cutting of Titanium Alloy with an Abrasive Water Jet},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {15},
  pages = {5405},
  doi = {10.3390/ma16155405}
}
Kostenlos starten →