EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Properties of SiCN Films Relevant to Dental Implant Applications

Xinyi Xia, Chao-Ching Chiang iD, Sarathy K Gopalakrishnan, Aniruddha V Kulkarni, Fan Ren iD, Kirk J Ziegler, Josephine F Esquivel-Upshaw iD

Materials · 28.07.2023 · 16 (15) · 5318

DOI: 10.3390/ma16155318 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.07.2023. Verfasst von Xinyi Xia und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, College of Engineering, University of Florida, Gainesville, FL 32611, USA. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIDCR NIH HHS, NIH HHS, NIH-NIDCR.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of surface coatings is a popular technique to improve the performance of materials used for medical and dental implants. Ternary silicon carbon nitride (SiCN), obtained by introducing nitrogen into SiC, has attracted significant interest due to its potential advantages. This study investigated the properties of SiCN films deposited via PECVD for dental implant coatings. Chemical composition, optical, and tribological properties were analyzed by adjusting the gas flow rates of NH3, CH4, and SiH4. The results indicated that an increase in the NH3 flow rate led to higher deposition rates, scaling from 5.7 nm/min at an NH3 flow rate of 2 sccm to 7 nm/min at an NH3 flow rate of 8 sccm. Concurrently, the formation of N-Si bonds was observed. The films with a higher nitrogen content exhibited lower refractive indices, diminishing from 2.5 to 2.3 as the NH3 flow rate increased from 2 sccm to 8 sccm. The contact angle of SiCN films had minimal differences, while the corrosion rate was dependent on the pH of the environment. These findings contribute to a better understanding of the properties and potential applications of SiCN films for use in dental implants.

Schlagwörter

Stichwörter der Autor:innen

PECVD film depositionchemical compositiondental implantsopticalsurface coatingternary silicon carbon nitride (SiCN)tribological properties

Autor:innen und Institutionen

  • Department of Chemical Engineering, College of Engineering, University of Florida, Gainesville, FL 32611, USA.
  • Department of Restorative Dental Sciences, Division of Prosthodontics, College of Dentistry, University of Florida, Gainesville, FL 32610, USA.

ORCID-Profile: Chao-Ching Chiang, Fan Ren, Josephine F Esquivel-Upshaw

Förderung

  • NIDCR NIH HHS
  • NIH HHS
  • NIH-NIDCR

Zitieren

APA

Xia, X., Chiang, C. C., Gopalakrishnan, S. K., Kulkarni, A. V., Ren, F., Ziegler, K. J., & Esquivel-Upshaw, J. F. (2023). Properties of SiCN Films Relevant to Dental Implant Applications. Materials, 16(15), 5318. https://doi.org/10.3390/ma16155318

Vancouver

Xia X, Chiang CC, Gopalakrishnan SK, Kulkarni AV, Ren F, Ziegler KJ, et al. Properties of SiCN Films Relevant to Dental Implant Applications. Materials. 2023;16(15):5318. doi:10.3390/ma16155318

BibTeX
@article{Xia2023,
  author = {Xia, Xinyi and Chiang, Chao-Ching and Gopalakrishnan, Sarathy K and Kulkarni, Aniruddha V and Ren, Fan and Ziegler, Kirk J and Esquivel-Upshaw, Josephine F},
  title = {Properties of SiCN Films Relevant to Dental Implant Applications},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {15},
  pages = {5318},
  doi = {10.3390/ma16155318}
}
Kostenlos starten →