Experimental Investigation on the Corrosion Detectability of A36 Low Carbon Steel by the Method of Phased Array Corrosion Mapping
Materials · 27.07.2023 · 16 (15) · 5297
DOI: 10.3390/ma16155297 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.07.2023. Verfasst von Jan Lean Tai und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, Faculty of Engineering, University Putra Malaysia, Serdang 43400, Malaysia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Geran Inisiatif Putra Siswazah (GP-IPS).
Abstract (Originalsprache)
Petrochemical plants use on-stream inspection often to detect and monitor the corrosion on the equipment and piping system. Compared to ultrasonic thickness gauging and pulse-echo A-scan, phased array corrosion mapping has better coverability and can scan a large area to detect general and localized corrosion. This paper’s objective is to obtain documentary evidence for the accuracy of corrosion detection from 30 °C to 250 °C on A36 low-carbon steel by carrying out simulation experiments every 10 °C step. A minimum of three sets of phased array corrosion mapping data in each temperature were collected to study and evaluate the detectability. The data evidence could enhance the confidence level of the plant’s end users in using phased array mapping in the future during inspections. The experiments were found to be insufficiently thorough despite addressing the initial concerns, leaving more area for discussion in further studies, such as expanding the investigation to thicker carbon steel, stainless steel, and wedge materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Aerospace Engineering, Faculty of Engineering, University Putra Malaysia, Serdang 43400, Malaysia.
- Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology in Szczecin, 19 Piastow Ave., 70-310 Szczecin, Poland.
- Laboratory of Biocomposite Technology, Institute of Tropical Forest and Forest Product (INTROP), University Putra Malaysia, Serdang 43400, Malaysia.
- Aerospace Malaysia Innovation Centre [944751-A], Prime Minister's Department, MIGHT Partnership Hub, Jalan Impact, Cyberjaya 63600, Malaysia.
- Institute of Mechanical Engineering, Faculty of Mechanical Engineering, Bialystok University of Technology, 15-351 Bialystok, Poland.
- Faculty of Technical Sciences, University of Warmia and Mazury in Olsztyn, 10-719 Olsztyn, Poland.
ORCID-Profile: Jan Lean Tai, Rafał Grzejda, Mohamed Thariq Hameed Sultan, Andrzej Łukaszewicz, Farah Syazwani Shahar, Wojciech Tarasiuk, Arkadiusz Rychlik
Förderung
- Geran Inisiatif Putra Siswazah (GP-IPS)
Zitieren
APA
Tai, J. L., Grzejda, R., Sultan, M. T. H., Łukaszewicz, A., Shahar, F. S., Tarasiuk, W., & Rychlik, A. (2023). Experimental Investigation on the Corrosion Detectability of A36 Low Carbon Steel by the Method of Phased Array Corrosion Mapping. Materials, 16(15), 5297. https://doi.org/10.3390/ma16155297
Vancouver
Tai JL, Grzejda R, Sultan MTH, Łukaszewicz A, Shahar FS, Tarasiuk W, et al. Experimental Investigation on the Corrosion Detectability of A36 Low Carbon Steel by the Method of Phased Array Corrosion Mapping. Materials. 2023;16(15):5297. doi:10.3390/ma16155297
BibTeX
@article{Tai2023,
author = {Tai, Jan Lean and Grzejda, Rafał and Sultan, Mohamed Thariq Hameed and Łukaszewicz, Andrzej and Shahar, Farah Syazwani and Tarasiuk, Wojciech and Rychlik, Arkadiusz},
title = {Experimental Investigation on the Corrosion Detectability of A36 Low Carbon Steel by the Method of Phased Array Corrosion Mapping},
journal = {Materials},
year = {2023},
volume = {16},
number = {15},
pages = {5297},
doi = {10.3390/ma16155297}
}
EUVIMED